Product Overview

© January 2022 A. O. Smith Corporation. All rights reserved.
www.hotwater.com | 800-527-1953 Toll-Free USA | A. O. Smith Corporation | 500 Tennessee Waltz Parkway | Ashland City, TN 37015
Page 2 of 2
AOSCE15701
COMMERCIAL
ELECTRIC WATER HEATERS
For technical information call 800-527-1953. A. O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
DRAIN
VALV E
ACCESS
PANEL
ACCESS
PANEL
T&P VALV
E
T&P
VALV E
ANODE
JUNCTION
BOX
SPECIFICATION
The water heaters(s) shall be model(s) No. ______ as manufactured by A. O. Smith or an approved equal. Heater(s) shall be rated at _____kW, _____volts, single-phase, 60 cycle AC,
and listed by Underwriters’ Laboratories. Models shall meet the standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IES 90.1. Tank(s) shall be
_____gallon capacity. Heater(s) shall have 150 psi working pressure and be equipped with an extruded high density anode rod. All internal surfaces of the heater(s) exposed to water
shall be glasslined with an alkaline borosilicate composition that has been fused-to-steel by firing at a temperature range of 1400°F to 1600°F. Electric heating elements shall be zinc
plated copper sheath. Each element shall be controlled by an individually mounted thermostat and high temperature cutoff switch. The outer jacket shall be of baked enamel finish and
shall enclose the tank with foam insulation. The drain valve shall be located in the front for ease of servicing. Heater tank shall have a three year limited warranty as outlined in the
written warranty. Fully illustrated instruction manual to be included.
Model Number
Gallon
Capacity
Standard Element
Wattage
Dimensions in Inches
Approx. Shipping
Weight (lbs)
A B C Diameter D
LTE 66D 66 6100 60-1/4 53 22 8 146
LTE 80D 80 6100 60-1/2 52-1/4 24 8 175
LTE 120D 119 6100 61-1/2 54-1/2 28 8 268
Standard factory wiring is for simultaneous operation.
PRODUCT SPECIFICATIONS
RECOVERY CAPACITIES
Not available with top mounted T&P valve option.
Inlet and outlet connections: 3/4”
Element Wattage
(Upper/Lower)
Input
kW
U.S. Gallons/Hour and Liters/Hour at Indicated Temperature Rise
°F 36 40 54 60 72 80 90 100 108 120 126
°C 20 22.2 30 33.3 40 44.4 50 55.5 60 66.6 70
6100/6100 12.2
GPH 140 126 93 84 70 63 56 50 47 42 40
LPH 531 478 354 318 265 239 212 191 177 159 152