User's Manual
Table Of Contents
- I. Note
- III. Operation Instruction
- 1. Basic Operation
- 1.1. Power on/Power off
- Power on
- Press and hold the power switch for 5 seconds; the unit displays the start-up logo and enters the working mode.
- Power off
- Press and hold the power switch for 5 seconds to turn the unit off.
- Sleep
- While the device is at working status, press the power switch, it enters the sleeping mode, and the screen will be off then. Press the power switch again, it shift to the normal mode. You may use this function when you don’t’ use the device temporary ...
- 1.2. Charging
- When the device prompts low battery, please charge it by provided charger.
- Note: To improve the longevity of the battery, you may charge for another 15 minutes after it prompts the battery is full.
- 2. Settings
- Click “Settings” in the main interface to enter the setting interface. Click the corresponding setting items to operate.
- 3. Wi-Fi connection
- 6. Audio and video playback
- 6.1. Audio playback
- Click the “MUSIC” in the main menu to enter the audio playback interface. It lists the audio files in the device, and you may click the file name to play it. in the audio playing interface, click the icons to play/pause/ increase volume/ decrease volu...
- 6.2. Video Playback
- Click the “Gallery” in the main menu to enter the video playback interface. It lists the video files in the device, and you may click the file name to play it. in the video playing interface, touch the screen to pop-up the operation icons and click th...
- 7. Picture viewing
- Click “Gallery” in the main menu to enter the picture folder list. Select and click the folder you want to enter, it displays the . click the thumbnail of the picture to view it.
- 8. Camera
- 9. Connect with external device
- 1. Basic Operation
- IV. Troubleshooting
- VI. Specifications
FCC STATEMENT
:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
9