Owner's Manual

23
2. In DTV mode
Use “-” button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press ”-” → press 3.
• Whether in ATV or DTV, after you input the channel numbers, press ENTER button to direct
to the channel immediately, or wait for 3 seconds to change automatically.
• Return to the previous channel, press RETURN button.
※ How to switch between Air TV and Cable TV?
When in TV mode, press TV/CATV button to switch, or go to the Tuner Mode in the TV menu to
select.
Sleep Time Setting
Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off
the LCD TV after a preset period of time passed. There are several times for choice –Off, 15
Minutes, 30 Minutes, 45 Minutes, 60 Minutes, 90 Minutes, or 120 Minutes.
Using the OSD function
You can use the OSD menus and options to adjust various settings by using the remote control.
The basic operation is as following:
 Press MENU to display OSD menu.
 Press ▲▼ to select your desired top Menu, and press ENTER or ► to enter it.
 Use ▲▼ to select the control you want to adjust.
 When selecting the control with II►, press ENTER to enable the function.
 Press ◄► to adjust or select the settings.
 Press MENU to exit from the OSD menu.
Aspect Ratio Table
Mode Aspect Ratio Handling
Source
Standard Resolution Full Letterbox Panorama Zoom No Scale Normal
AV/ S-V/
YPbPr/
HDMI
NTSC 480i (60Hz) Yes Yes Yes Yes Yes Yes
SD 480p (60Hz) Yes Yes Yes Yes Yes Yes
HD 720p (60Hz) Yes No No Yes Yes Yes
YPbPr/
HDMI
HD 1080i (60Hz) Yes No No No No Yes
SD 480p (60Hz) Yes Yes Yes Yes Yes Yes
HD 720p (60Hz) Yes No No No No Yes
DTV
HD 1080i (60Hz) Yes No No No No Yes
• Aspect Ratio function does not support on PC Timings.