Content FOR YOUR SAFETY ......................................................................................................... 2 PRECAUTIONS AND REMINDERS .................................................................................. 4 IMPORTANT SAFETY INSTRUCTIONS ........................................................................... 6 Quick Installation ............................................................................................................... 8 Wall-mount instruction .....
SA 1965 SA 1966 DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on February 17, 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital pro-gramming, but should continue to work as before for other purposes (e.g.
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Don't place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Unplug immediately if other foreign materials are put inside TV box or if the TV fell down. Don't throw any object inside the TV box like metals or other flammable materials. Prohibit/Avoid opening TV cabinet 4 Downloaded From TV-Manual.
Remember to unplug the AC cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the display. Avoid direct sunlight, dusty, high humidity and smoky areas. Make sure to unplug the unit when not in use for a long period of time (days). Call service personnel to clean the internal part of the TV once a year. Do not cover or block any vents and openings. Inadequate ventilation may shorten the life of the display unit and cause overheating.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product. Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet.
Quick Installation Install Remove 8 Downloaded From TV-Manual.
Wall-mount instruction Attaching The Optional Wall Mount Arm (not supplied) Follow these steps to finish installing the wall mounting arm: 1. Place the wall mounting arm onto the back of the TV. Line up the holes of the arm with the holes in the back of the monitor. 2. Insert the 6 screws into the holes and tighten. 3. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall.
ACCESSORIES Thank you for purchasing this LCD-TV. This LCD-TV package comes with: LCD TV User’s Guide book Remote control Battery AAA x 2 Power Cord RCA A/V Cable Quick Setup Guide Pedestal stand 10 Downloaded From TV-Manual.
FRONT PANEL BUTTONS Volume Down Volume Up On Screen Display Menu On/Off CH Down CH Up Enter Power ON/OFF button Remote Control Receiver Power LED Indicator Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. (Only for DTV source in this model.) 11 Downloaded From TV-Manual.
BACK PANEL BUTTONS A B C D E F G H I A B C D E F G H I J K L M N O P Q R J K L M N O P Headphone Jack SPDIF Optical output Audio output (left/right) Audio Input for VGA or HDMI 2 AV/ S-Video signal Audio input (left/right) YPbPr 1 signal Audio input (left/right) YPbPr 2 signal Audio input (left/right) HDMI 1 signal Audio input (left/right) Power (AC input) Service (USB Terminal) HDMI 1 Input Terminal HDMI 2 Input Terminal VGA signal input YPbPr 2 signal input YPbPr 1 signal input S-Video input Cable/A
REMOTE CONTROL 13 Downloaded From TV-Manual.
Remote control button function as follows: 1 POWER Power On/Off 2 MTS Select Mono, Stereo or SAP sound 3 INFO Display current information 4 SLEEP Set timer to turn off TV 5 SOUND Select Sound modes 6 0~9, - number Directly channel select 7 VOL + and VOL - Adjust volume UP/DOWN 8 GUIDE Select electronic program guide (EPG) 9 FAV.
INSTALLATION Connecting RF antenna and Cable TV Make sure the power is OFF before installing your LCD TV. 1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV channels into memory with Auto Scan function when using an antenna TV system. This air input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV system (ATSC) can be found by the scanning of “AIR” in the Auto Scan function. See page 26.
2) With S-Video cable: S-Video Cable (not supplied) Audio in Cable (not supplied) VCD or DVD Player 3) With YPbPr cable: YPbPr Cable (not supplied) Audio in Cable (not supplied) VCD or DVD Player 4) With HDMI cable: VCD or DVD Player (DVD Player should have the HDMI output terminal) HDMI Cable (not supplied) 16 Downloaded From TV-Manual.
5) With HDMI-DVI cable: Audio Cable (not supplied) VCD or DVD Player (DVD Player should have the HDMI output terminal) HDMI-DVI Cable (not supplied) Connecting to External Stereo System to Listen to LCD TV Sound Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo system sold separately). Audio in Cable (not supplied) Stereo system Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately).
Connecting to a Computer 1) With VGA Cable: Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the audio input terminal (green) of the LCD TV. PC PC Audio In Cable (not supplied) VGA 15 Pin Cable (not supplied) 2) With HDMI-DVI Cable: Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the LCD TV.
Connecting with the power cord Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have been completed, and plug the other end of the power cord into a correctly grounded electrical outlet. AC power socket Power Cord 19 Downloaded From TV-Manual.
BASIC OPERATION To operate your LCD TV, you may use the TV remote control or top panel buttons to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert the power plug and the power LED indicator will light red. Power On/Off To turn the LCD TV on/off: Press POWER button under the LCD TV, or press the POWER button on your remote control to turn on/off the TV.
4. Select your tuner mode from Air or Cable, then press ► to continue. Connect cable and/or antenna, and select Scan or Skip Scan with ▲ or ▼, then press ► to continue. If you select Skip Scan at this step, you can still perform channel scan in Menu. 5. The channel scanning now starts. To interrupt scanning, press MENU at any time. 6. After you complete the Initial Setup, press ENTER to exit the wizard.
Volume Adjusting Press VOL +/- to adjust volume. To turn off the volume, press MUTE. To restore volume, press MUTE again, or press VOL +/- directly. Sound Mode Select Repeatedly press SOUND key to select the sound mode between Off, Concert, Living Room, Hall, Bathroom, Cave, Arena, or Church. Picture Mode Select Repeatedly press PICTURE key to select picture mode between User, Cinema, Sport, Vivid, and Hi-Bright.
2. In DTV mode Use “-” button to select the sub channel in DTV. Ex: Your desired number is 80-3. Press 8 → press 0 → press ”-” → press 3. • Whether in ATV or DTV, after you input the channel numbers, press ENTER button to direct to the channel immediately, or wait for 3 seconds to change automatically. • Return to the previous channel, press RETURN button. ※ How to switch between Air TV and Cable TV? When in TV mode, press TV/CATV button to switch, or go to the Tuner Mode in the TV menu to select.
ADVANCED OPERATION—OSD MENU Video Menu —To adjust the picture quality In TV, AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1, HDMI 2 source: (When in AV, S-Video, YPbPr or HDMI source, the TV option on the left does not appear.) In VGA source: Picture Mode: To select picture mode between User, Cinema, Sport, Vivid, and Hi-Bright. Noise Reduction: To reduce the noise level of connected equipment. Select from Low, Medium, Strong, or Off. Brightness: To adjust luminance of video. (right: Max, left: Min.
Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position, fine tune and H-Size. VGA: Press ENTER to adjust VGA setting. H. Position: To adjust the horizontal position of the picture. V. Position: To adjust the vertical position of the picture. Phase: To adjust delay time of phase in order to reduce the noise of picture. Clock: To adjust delay time of clock in order to reduce the noise of picture.
In AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1, HDMI 2, VGA source: Balance: To adjust left and right audio balance. Bass: To adjust bass. Treble: To adjust the treble. Surround: To enjoy a concert hall effect, select “On” when stereo is playing. Reverb: To enjoy the reverb sound effect of Concert, Living Room, Hall, Bathroom, Cave, Arena, or Church. Equalizer: To select equalizer modes from Rock, Pop, Live, Dance, Techno, Classic, Soft. SPDIF Type: To select SPDIF Type from Dolby Digital, PCM, or Off.
Channel Skip: Press ENTER to skip the channel. To restore the channel, press ENTER again. MTS: To select audio available mode. Audio Language: To select available audio language. Setup Menu —To set up OSD window In TV, AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1, HDMI 2 source: (When in AV, S-Video, YPbPr or HDMI source, the TV option on the left does not appear.) In VGA source: OSD Language: To select an OSD language from English, Spanish or French.
Time Setup: To set Time Zone, Time, Sleep Timer, Auto Sleep, and Daylight Saving. Time Zone: To select the time zone appropriate to your location. Press ▲ or ▼ to select “Time Zone”, and select the time zone of your area with ◄ or ►. Time: To set the current time. Press ▲ or ▼ to select “Time”, then press ENTER to enter the setting. ‧ Auto Synchronization: When “Auto Synchronization” is enabled, the date and time will be automatically synchronized according to the program content.
Digital Caption Style: Press ◄► to select Caption Style from “As Broadcaster” or “Custom”. When “Custom” is selected, use ▲▼ to select the desired controls, ◄► to adjust detailed settings. ‧ Font Size: To select a font size from Large, Small, or Medium. ‧ Font Color: To select a font color from Black, White, Green, Blue, Red, Cyan, Yellow, or Magenta. ‧ Font Opacity: To select font opacity from Solid, Translucent, or Transparent. ‧ Background Color: To select background color.
Channel Block: To block channels. Use ▲▼ to select the channel you want to block, and then press ENTER to block or unblock it. This function is only enabled in TV source. Program Block: To set TV and Movie Ratings. Rating Enable: Choose “On” to enable the below settings. U.S. TV Ratings: To adjust TV blocking level in the US. You can select between TV-Y, TV-Y7, TV-G, TV-PG, TV-14, or TV-MA. 30 Downloaded From TV-Manual.
The TV Ratings in the US are defined as following. TV-Y All children TV-PG TV-Y7 Directed to older children: this TV-14 program is designed for children age 7 and above Parental guidance suggested Parents strongly cautioned: this program contains some material that is unsuitable for children under 14 years of age TV-G General audience TV-MA Mature audience only Use ENTER button to customize the ratings, and use MENU to exit. U.S. Movie Ratings: To adjust movie blocking level in the US.
Canadian French Ratings: To adjust blocking level in French-speaking region of Canada. You can select between G, 8 ans +, 13 ans +, 16 ans +, 18 ans +. The Canadian French Ratings are defined as following. G General 16 ans + Not appropriate for children of less than 16 years 8 ans + Children eight years and older 18 ans + Reserved to adults 13 ans + Not appropriate for children of less than 13 years Use ENTER button to customize the ratings, and use MENU to exit.
Input Block: To set the input source to be blocked. Users will not be able to watch the content coming from the blocked input source. Use ENTER button to block the input source, and press ENTER again to unblock. Change Password: To change the password, press ENTER, and the following screen appears. Enter the new password from the remote control, and then enter the new password again to confirm.
TECHNICAL SPECIFICATION LCD Type 26.0” TFT Active Matrix 0.4215 (H) x 0.4215 (V) mm pixel pitch Input signal Color Filter RGB vertical stripe Glass surface Anti-Glare RGB RGB analog (0.7/1.
SAFETY PRECAUTIONS This LCD TV is manufactured and tested to insure the user’s safety. Improper use or installation may result danger to the LCD TV as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS This LCD TV should be operated only at the correct power sources indicated on the label on the rear end of the LCD TV. If you’re unsure of the power supply in your residence, consult your local dealer or power company.
CARE AND MAINTENANCE Care Avoid exposing your LCD TV directly to sunlight or other heat source. Place your LCD TV away from the sun to reduce glare. Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your LCD TV. Make certain your LCD TV is installed in a clean and moisture-free area. Keep your LCD TV away from magnets, motors, transformers, speakers, and TV sets.
