manual

ManualsBrandsAOC ManualsLCD TVsL32W781A

Quick

Guide

Start

L26W781B / L32W781B

L37W781B / L42W781B

Insert batteries into

Remote Control

Remove the cover of the battery compartment.

Install two LR03 / AAA batteries in the remote control.

Install TV

assemble: Insert the stand base and fix these four screws.

How to assemble and disassemble base:

Lay TV set face-down on a cloth or other soft surface.

How to reveal screw holes to fit wall mounting:

Remove the stand base

Fasten six units M4.0 X 10mm

screws to secure the wall mount

bracket.

disassemble: Unfix these four screws and remove the stand base.

- 1 -

Summary of content (5 pages)

PAGE 1
Quick Start Guide L26W781B / L32W781B L37W781B / L42W781B 2 1 Insert batteries into Remote Control Remove the cover of the battery compartment. Install two LR03 / AAA batteries in the remote control. Install TV How to assemble and disassemble base: Lay TV set face-down on a cloth or other soft surface. 1 assemble: Insert the stand base and fix these four screws. 2 disassemble: Unfix these four screws and remove the stand base.
PAGE 2
3 1 Connections Plug in aerial and firmly into the aerial socket ANT IN ╦ 75Ω at the back of the TV and connect ancillary equipment. SET TOP BOX CABLE VCR/DVD recorder 2 Plug the power cord into household mains socket.
PAGE 3
4 Switch on 1 Plug your TV and any other equipment that you have connected into the mains. 2 Press the On/Standby switch ( ) on the right side of your TV to switch on your TV. Go to step 5. NOTE: Outline for reference only IMPORTANT NOTES a There are two ways to switch the TV set to stand-by mode. (A) Press the switch on the LCD TV and check GREEN LED is lit. OR (B) Press the Power button on the remote controller.
PAGE 4
5 1 Quick OSD Guide Press the MENU button on the remote controller into the main OSD (On Screen Display). 2 ▼ ▲ Use the “▲” ,“▼” button on the remote controller to select the desired item ,then use “ ” or “ ” button to enter it, and use “MENU” button for exit. Select the Language From MENU OPTIONS MENU LANGUAGE, to select the desired language. 3 Select the Country From MENU INSTALLATION AUTO.
PAGE 5
4 Programme Sorting From MENU a b ▲ ▼ When selected country ok, move to “START”, then press “ ” or “ ” button to scan programme, your stations will be located and stored. INSTALLATION MAN. INSTALLATION Store prog. : Allows to Save a channel on a new Program No, to Insert a channel on an already existing Program No(the channel previously saved on this program no will be shifted to the upper program no) or to Delete the Program No.