Owner's Manual

10
English
Controls & Connections
1.
VOL Press to increase the sound volume level.
2.
VOL Press to decrease the sound volume level.
3. CH Press to select the next higher program number.
4. CH Press to select the next lower program number.
5.
MENU
Press to open or exit the OSD (on-screen display)
menu.
6.
INPUT Press to select the input source.
7.
Power Press to turn on / off (standby) the TV set.
Item Description
Headphone Jack
Connects to your headphones. If your headphones do not match the jack, use a suitable plug adapter (not
supplied). While headphones are connected, the TV speakers are muted.
AV IN
L-AUDIO-R
Connects to the COMPOSITE VIDEO output jack from your video equipment that has COMPOSITE, and audio
(L/R) jacks can connect audio source to your TV.
AV OUT L-AUDIO-R
Connect to the COMPOSITE Video/Audio input jacks from your equipment that has COMPOSITE jack.
TV/AV source can support this function.
HDMI IN
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between
this TV and any HDMI-equipped audio/video equipment, such as a set-top box, DVD player, Blu-ray Disc player,
A/V receiver as well as PC. HDMI supports enhanced, or high-definition video, plus digital audio.
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN (with DVI-to-HDMI
cable or adapter) jack, and connect the audio jack to the PC AUDIO IN jacks of HDMI IN.
DVI-to-HDMI cable DVI-to-HDMI adapter
HDMI connection is necessary to view 480i, 480p, 720p, 1080i and 1080p formats.
Be sure to use only an HDMI cable that bears the HDMI logo.
PC IN (RGB/AUDIO)
Connects to a personal computer’s video output connector using HD15-HD15 cable (analog RGB). Can also be
connected to other analog RGB equipment. See “PC Input Signal Reference Chart” on page 15 for the signals that
can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case,
connect the adapter to the computer before connecting the HD15-HD15 cable.
If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen settings.
Component IN
L-AUDIO-R
Connects to your TV’s component video (YPbPr ) and audio (L/R) jacks. Component video provides better picture
quality than the composite video connections. Component video (YPbPr) connection is necessary to view 480i,
480p, 720p, 1080i and 1080p formats.
TV(VHF/UHF/Cable) Input
RF (Radio Frequency or modulated signal design used as the carrier for television broadcasts.) input that
connects to your Cable or VHF/UHF antenna.
SPDIF
SONY/Philips Digital Interconnect Format. SPDIF is mostly used to transmit compressed multichannel audio from
a media player to an Amplifier/receiver.
VOL
VOL
Channel
Channel
Menu
Input
Power
HDMI
Headphone Jack
AV IN
Component AV OUT
AV OUT
ANTENNA / CABLE
ANTENNA / CABLE
HDMI
VIDEO
L
R
SPDIF
PC IN
PC IN SPDIF
VIDEO
AV IIN