User Manual Statement To make the best use of your phone is in the state , please read this manual carefully . For the sake of accuracy , this manual has been validated and reviewed . This manual contains instructions and descriptions of publication is accurate . But after the phone and manual may change without notice .
Table of Contents Safety Information .................................................................................... 4 Appearance and Key Function ............................................................... 7 Introduction ................................................................................................ 8 Call Functions ........................................................................................... 9 Contacts ................................................................
Gallery ...................................................................................................... 25 Music......................................................................................................... 27 Sound Recorder ...................................................................................... 28 Alarm Clock ............................................................................................. 30 FM Radio..............................................................
Safety Information Please carefully read the terms below: Use Safely Do not use your mobile phone where it might cause danger. Transportation Safety Please observe all transportation laws and regulations. Please drive with both hands on the wheel. DO NOT TEXT AND DRIVE Hospitals Please follow limitations. Please turn off your mobile phone when near medical instruments.
Please follow all flight safety regulations and do not use your phone during flight. Toxic Chemicals Do not use your mobile phone around fuels or chemicals. Explosion Hazard Please observe related limitations and do not use your mobile phone around an area where explosions may occur. Accessories and Batteries Please use only Blu authorized accessories and batteries. Backup Please remember to keep a written record of all important information. Water Your phone is not waterproof.
Emergency Calls Make sure your mobile phone is switched on and in a service area. In home screen, tap the phone key and dial 112 and send.
Appearance and Key Function Front Camera Volume Power Menu Back Home 7
Introduction Installation of the SIM Card Please install the SIM card before using your phone. Note: Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please be cautious when carrying, installing or taking out the SIM card. The SIM card is obtained through your service provider. To insert SIM card(s): 1. Switch off the mobile phone and remove the rear cover. 2. Insert the SIM card(s) 3.
the phone. Long press the Power key to switch on the phone on. Off - In standby mode, long press on Power key until an options menu appears. Select OFF in the menu and confirm Password Lock You may set a screen unlock picture or a PIN code lock as a security measure. For further information regarding password locks, password revision and other functions please enter the security settings of the phone. Call Functions At the dial keyboard, enter the phone number and then click the dial key.
through speed dial.
Call Logs Every telephone number called and received will be saved in the phones call log. There will be an indicator in the call logs that will display SIM1 or SIM2. All numbers in the call log can be dialed directly by clicking the dial icon on the right side of the screen. When the number appears on the list, click it to view details. Proximity Sensor The proximity sensor determines how far away an object is from the device.
Enter: Click on the applications menu and select contacts • The default display is the phone contacts and SIM card contacts • The contacts are organized alphabetically by default. Search Add Contact Click the Search icon to enter the contact search interface.
• Any numbers or letters associated with any of the contacts saved in the list will be shown in the search results. • If there were no matches for the inputted contact, the interface will display no contacts found. Add New Contact 1. Click “Add Contact” icon 2. Select to save contacts to phone or SIM card 3. You may edit contact picture, name, telephone number, group, address, and email among other options 4. Click to finish and save contact.
Messaging You may use this function to exchange text messages and multimedia messages with your family and friends. The messages to and from the same contact or phone number will be saved into a single conversation so you may see the entire message history conveniently. Send an SMS Application Menu » Messaging » New message (or use shortcut icon) 1. Click to enter recipient (You may enter contacts from contact book or enter a new number) 2. Compose Message 3.
When creating message, the default message style is SMS. The message will automatically convert to MMS when adding an attachment. 1. Click the Paperclip icon in the messaging interface. 2. Click “Attach” to add the following attachments.
Attachment Type for MMS Message Internet Browser 17
Menu Functions Backward • After browsing through multiple pages, this option will return the user to the previous page. Forward • After browsing through multiple pages, this option will move to a web page after the current page. Windows • You may view all windows open by clicking the windows icon in the upper right part of the browser. Bookmarks • Click the Bookmarks option to make the current URL as a saved Bookmark. • Click Bookmarks to opened saved bookmarks.
More Find on page: Search current page. Share page: Select to share the current page. Save for offline reading: Saves page for offline reading. Page info: Display page address and other information of the current browsing History: Show your browsing history and view the most visited pages. Settings: Contains a variety of browser settings.
Bluetooth is a short-range wireless communications technology that devices can use to exchange information and connect to different types of devices which include headsets, car kits, and other devices. Power on Bluetooth 1) Settings » Wireless & Networks » Bluetooth and select to power on Bluetooth. 2) The Bluetooth icon will appear grey in the in the notification bar. Click “scan for devices” and the phone will start to scan for all devices within range.
List of available devices Camera Camera Prior to use: Install memory card before using the camera or video 21
camera. All photos or videos taken by the phone are stored in the memory card. Open Camera 1. Applications Menu » Camera 2. Switch to video mode if you want to record videos. Note: You may also place a camera shortcut on any of the screens Take Pictures 1. Aim the object that the picture will be taken. 2. Press the “Shutter” button on the screen. 3. After taking the picture, the file will be saved in the camera’s gallery folder. 4. You can view the photos by clicking the preview box button.
When in the camera viewfinder mode, you can switch to video or photos’ gallery. On the camera viewfinder mode, you will find the display the preview of the previous picture taken. Click the “preview box” and the photo will display in full screen.
Camera Options Select from Camera or Video 24
Gallery Open Images Applications Menu » Gallery Share Pictures You may share pictures by sending them through Gmail or the E-mail application. You may also send pictures through the MMS message function by composing a message and attaching the picture. Any image can also be sent via the Bluetooth function by selecting Bluetooth equipment that has been paired. Adjust Image Press Menu and Edit to adjust images Edit light: Fill Light, Highlights, Shadows, Auto-Fix.
Color Effects: Warmth, Saturation, B&W, Sepia, Negative, Tint, Duo-tone, Doodle. Crop: Crop, Red Eye, Straighten, Rotate, Flip, Sharpen. View Images In the picture interface, click on an album to view images You can choose to display small or large thumbnails. In the photo album, scroll the picture towards left to view the next picture or towards right to view the previous one. Crop Pictures 1. If you want to adjust the size of the picture, use the crop tools.
Music Open Music Application Menu » Music Player Options Song Controls Song Status 27
Search Music You may choose to search for music from media folder through artist name, song name, album name. The following formats are available: AMR, M4A, MIDI, MP3, WAV, and OGG. Sound Recorder The Sound Recorder can record voice or any audio. You may send any recorded audio via Bluetooth or MMS and also have the option to make any recorded audio the phones default ring tone. Notice: The recorder only uses AMR 3GPP format. Record - Keep the phone’s microphone near the voice source.
- Click the record button to record the audio. - Click the stop button to stop recording the audio. All recordings will be saved in my recording folder in the default music program.
Alarm Clock 1. Click on the Clock icon in the application menu 2.
FM Radio FM Radio Through this function, you may listen to FM radio on the device. The FM radio uses the wired headphones as an antenna in order to receive signal. Before using this function, connect the original equipment headphones that came with the phone. Open FM radio Press the FM Radio icon to open the application. 1. Click “Search” automatic scans of FM channels. 2. Click to add favorite radio stations.
Radio Options Add Favorite Radio Stations Scan 32
FM Radio as Background Click on the Home key to move the FM Radio program to the background. Settings SIM Management • Select to disable the SIM card. • Network Operators. Wi-Fi / WLAN • Wi-Fi » Wi-Fi settings » Click Wi-Fi to power on. When switched on, the Wi-Fi will automatically search for available networks.
credentials prior to connection. Bluetooth • Press the switch to power on Bluetooth. Once on, the Bluetooth will automatically scan for any nearby open equipment. Data Usage • Data usage and mobile data traffic limit. More Wireless & Networks • Airplane Mode • VPN • Tethering & Portable hotspot • Mobile networks and APN Settings Note: When in flight mode, Wi-Fi will turn off automatically.
Audio Profiles This option sets the phone tone settings for receiving calls or notifications. Some of the settings include • Vibrate, volume, ring tones, ring tones notification and haptic feedback tones Display (a) Brightness (b) Auto rotating screen (c) Wallpaper (d) Screen Timeout Storage • View the SD card and phone memory usage. • Allows the removal or formatting of the SD card. • Allows selection of the default memory.
• General power usage Apps • Manage applications - Manage and delete installed applications. • Running services - Press any of the services listed in the two-button operation box. Press the ‘Stop’ button to stop any of the services listed and removes from the "running services" list. Location Access • Use wireless - Use wireless services to find locations in applications. • When using the GPS satellite positioning, set accuracy to street level (Cancel it to save battery).
Set up screen locks: Use a pattern, PIN or password to lock the screen. • Pattern: The first time there will be simple unlock instructions and examples. Click “next step” to continue the security pattern step. • PIN: Enter PIN number to unlock the screen. • Password: Set password to unlock the screen. You may stop the security feature at any time. Set up SIM card PIN lock • SIM card PIN (Personal Identification Number) is used to prevent unauthorized use of SIM cards.
new PIN code twice. The phone will then prompt you that the change was successful. If you enter the PIN incorrectly three times, the SIM and PIN codes will be automatically locked. You will need the PUK code to unlock the phone which is available through your service provider. If you enter the PUK code incorrectly 10 times, the SIM card will be permanently locked. Please see your service provider for a new SIM card. • Password visible – Make the password visible when it’s typed.
• • Custom Dictionary - Add or delete words to the custom dictionary. Keyboard Settings – (a) Haptic vibration (b) Haptic tones (c) Capitalizing (d) Speech Input (e) Inputting words (f) Predictive text function (g) Auto-Text (h) Input keyboard method Backup & reset • Backup Data – Will back up all application data, WLAN passwords, and other settings to Google's servers • Restore to Factory Settings - Clear all data stored on the phone. Date & Time • Automation - Use date and time provided by Network.
• • Time Zone - Select Time Zone according to where your location.
If the phone does not display Developer options, to access: Press ‘Build number’ seven (7) times in the about phone tab in settings. • The developer options gives access to USB Debugging and other developer options About Phone • You can check the information on status and remaining power • You may periodically check for any software or firmware updates through the System Updates option. Storage Connect the phone with the USB cable provided. Once connected, a connection icon will appear in the status bar.
select USB mass storage or another option and turn on from the connection screen.
Some system settings and user interface (UI) options may vary depending on SW version. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.
responsible for compliance could void the user's authority to operate the equipment. RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The highest reported SAR values for head and body are below: Head: 0.333W/kg(1g); Body:0.992W/kg(1g) respectively.
WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna.
from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 1.0cm must be maintained between the user's body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters and similar accessories containing metallic components shall not be used. Body-worn accessories that cannot maintain 1.
For more information about RF exposure, please visit the FCC website at www.fcc.gov Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S.
(1992) / (1986) / (1996) Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1).
or headset) to avoid potential exposure to RF energy. The design of your phone complies with the FCC guidelines (and those standards). Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations.
