User's Guide
Table Of Contents
Using the Sylphyo as a controller
You should be able to play right away and see the on-screen controls
update according to what you play.
If not, make sure the MIDI input at the top of the window is set to Syl-
phyo. If you don’t see it on the list, make sure your Sylphyo is plugged
to a USB port on your computer, then hit the Refresh buon before
selecng the MIDI input again.
If the applicaon reacts to your Sylphyo but doesn’t make any sound,
you might have to select appropriate audio sengs at the boom of
the window. First verify that the Driver and Output are set to appro-
priate values, and click the speaker icon at the boom le corner if it
becomes dark. You can also adjust the volume control slider underneath
if necessary.
If you hear a delay between your acons and the resulng sound, you
may have to tweak Buffer sizes. Put the same number in both boxes,
28