User's Guide

The Link receiver
First, on the Link side, press both
▲
and
▼
at the same me to start
the pairing process. The light will become yellow unl the Link has
found an available Sylphyo.
Then, on your Sylphyo, go to the sengs menu by holding the key
while swiping your thumb from the boom to the top of the slider.
Make sure the Wireless (Link) item is checked, and select the Re-
ceiver device item just below to start the pairing process from the
Sylphyo side. The icon of the menu item should become
…
unl the
Sylphyo has found an available Link.
A few moments aer, you should see the light changing to green on
your Link, and the icon changing to
◆
on your Sylphyo: your Sylphyo
and Link are paired!
If not, just restart the pairing process again.
From the moment your Sylphyo and Link are paired, they will constantly
look for each other. If your Sylphyo doesn’t find your Link, it will display
the
?
icon. If your Link doesn’t find your Sylphyo, it will display a red
light .
VIDEO youtu.be/LvsWkr39zLc
 Pairing with the Link receiver
Playing wirelessly using the internal sounds
If your Sylphyo and Link receiver are paired, you can now play wire-
lessly.
Connect the Link to a power supply. Then, connect it to an amp, a
mixer, a hi-fi system, or any speakers or sound system, using either the
38