User's Guide

headphone output port or the line output ports (the sound will be louder
when using the headphone output port).
Finally, turn on your Link and your Sylphyo, and play. In addion to
hearing sound, you should see the indicator light responding to your
breath.
VIDEO youtu.be/oeNPNlGelR4
 Quick start with the Link receiver
From then on, to use your Sylphyo wirelessly as a controller, you can
connect your Link to any other equipment you would have directly con-
nected your Sylphyo to, and it will transparently convey what you play
on your Sylphyo.
Playing wirelessly with a computer
Connect the included USB cable to the smaller USB power supply port
of the Link, connect the other end to a USB port on your computer, and
turn on your Link. As with the Sylphyo, no drivers are required, and it
should be immediately recognized as a standard USB-MIDI peripheral.
You can use Sylphyo Bench or any virtual instrument just like you would
do when the Sylphyo is connected directly. Just turn on your Sylphyo
and you can start playing.
VIDEO youtu.be/Jov0iqmQ7Q0
 Quick start with a PC/Mac computer
Note that the Link shows up in your computer as three different MIDI
input/output ports in the following order:
39