Energy Guide
Page 19 of 104 Report No.: HK2107050725-SR
UL 507
Clause Requirement + Test Result - Remark Verdict
TRF No. UL507A
d)Being marked "G," "GR," "GND," "Ground,"
"Grounding," the grounding symbol, , or the like; or
P
15 e)A marking on a wiring diagram provided on the
appliance.
N/A
Power Supply Connections – Cord-Connected
Appliances
P
15.1 Cords and plugs P
15.1.1
A portable appliance shall be provided with a
flexible cord in accordance with Table 15.1 and an
attachment plug for connection to the power-supply
circuit. The length of cord external to the appliance
shall be measured from the face of the attachment
plug to the point of attachment or entry into the
enclosure.
N/A
15.1.2 A product as describe in Table 15.1 rows 1and
2,but intended for commercial or industrial usr,shall
employ a cord as described Table 15.1, row 3, and
be marked in accordance with 80.1.10.
N/A
15.1.3 The flexible cord shall be rated for use at a voltage
not less than the rated voltage of the appliance,
and shall have an ampacity not less than the
current rating of the appliance.
P
15.1.4 The flexible cord for products as described in rows
1 and 2 of Table 15.1 shall be attached
permanently to the appliance or be in the form of a
separate cord set with acceptable means for
permanent connection to the appliance.
P
15.1.4.1 An appliance intended for use with a detachable
cord set shall not be provided with terminal pins
that accommodate a standard flatiron or appliance
plug.
N/A
15.1.5
The voltage rating of the attachment plug shall not
be less than that of the appliance. When an
appliance can be adapted for use on two or more
different values of voltage by field alteration of
internal connections, the attachment plug shall be
rated for the voltage for which the appliance is
connected when shipped from the factory. See
80.2.2.
P
15.1.6
The current rating of the attachment plug for an
appliance rated 12 amperes or less shall not be
less than the current rating of the appliance. For an
appliance rated more than 12 amperes, the current
rating of the attachment plugs shall not be less
than 125 percent of the current rating of the
appliance.
P