Energy Guide

Page 5 of 104 Report No.: HK2107050725-SR
UL 507
Clause Requirement + Test Result - Remark Verdict
TRF No. UL507A
6 Components P
6.1
General
P
6.2
Attachment plugs, receptacles, connectors, and
terminals
P
6.3
Boxes and raceways
N/A
6.4
Cords, cables, and internal wiring
P
6.5
Cord reels
N/A
6.6
Light sources and associated components
N/A
6.7
Overcurrent protection
P
6.8
Power supplies
P
6.9
Supplemental insulation, insulating bushings, and
assembly aids
P
7
Frame and Enclosures
P
7.1
General
P
7.1.2
A cast- or sheet-metal section of the enclosure
shall not be thinner than the applicable value
specified in Table 7.1.
P
a)Mechanical strength and impact resistance with
regard to intended use and location of the
appliance;
P
b)Resistance to corrosion;
P
c)Size and shape; and
P
d)Location on the appliance.
P
7.1.3
A fan having features intended to be attractive to
children or to have play value or an appearance of
play value shall:
N/A
a)Be provided with a marking that warns
against use as a toy as described in 81.6;
and
N/A
b)Not have any portion of the fan intended to be
removed and utilized as an item with play value.
N/A
7.1.4
The enclosure of an appliance shall prevent molten
metal, burning insulation, flaming particles, and
other ignited material from falling onto flam
P
7.1.5
The requirements in 7.1.4 necessitate the use of a
metal barrier or a non-metallic barrier of a material
having a zero flame spread rating when tested as
described in the Standard for Tests for Surface
Burning Characteristics of Building Materials, UL
723:
P