Installation Guide

6
User Manual
www.AvantcoRefrigeration.com
Curved Glass Bakery Display Cases
Safety Information
To minimize shock and fire hazards, be sure to not overload outlet. This unit should be given its own outlet.
DO NOT use extension cords.
DO NOT put your hands under the unit while it is being moved.
When the unit is not in use for a long period of time, unplug the unit from the outlet.
After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so could cause
damage to the compressor.
To minimize shock and fire hazards, do not plug or unplug the cord with wet hands.
Unplug the unit before performing maintenance or cleaning.
To minimize shock and fire hazards, make sure that the unit is properly grounded.
DO NOT attempt to remove or repair any component unless instructed by the factory.
DO NOT allow the unit to rest on or against the electrical cord and/or plug.
DO NOT store any flammable/explosive gas or liquids inside the unit.
DO NOT attempt to alter or tamper with the electrical cord.
DO NOT use the unit if the power cord is damaged.
Pay close attention to the safety notices in this section. Disregarding these notices may lead to serious injury
and/or damage to the unit.
Loading Product
Ensure there is at least 4" of clearance from the evaporator.
Ensure all shelves are sitting level and properly secured before loading products.
DO NOT store flammable/explosive gas or liquids inside the unit.
Operation