FCC ID: U6DAL260V1 ATTACHMENT E. - USER’S MANUAL - HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No.
Setting the Picture Changing the Picture Mode Your the TV has 3 automatic factory preset picture settings (Standard, Vivid and Mild). You can choose Standard, Vivid or Mild by pressing Picture button on the remote control (or by making a selection from the menu). Or you can select User which automatically recalls your personalized picture settings. Picture 1 Press Menu/Set button to display the main OSD menu. 2 Select the Picture main menu. 3 Press Menu/Set button to enter the sub menu.
Setting the Picture Contrast Adjust brightness difference between bright part of the screen and dark part. Distinct ¥ Vague Dark ¥ Bright Decrease ¥ Increase Less sharp ¥ Sharp Green color is deeper ¥ Red color is deeper Brightness Adjust brightness of the screen. Color Adjust deep and light color of the screen. Sharpness Adjust vividness of the screen. Tint Adjust the balance between green and yellow.
Setting the Picture Changing the Color Temperature Your TV has 5 screen temperatures (color settings). 1 Press Menu/Set button to display the main Picture OSD menu. 2 Select the Picture main menu. 3 Press button to enter the picture menu. 4 Select Temperature and press Menu/Set button to enter the sub menu. Then the picture-temperature under menu appear.
Setting the Picture Video NR (Noise Reduction) This function automatically filters out and reduces the image noise and improves picture quality where receiving weak signals. 1 Press Menu/Set button to display the main Picture OSD menu. 2 Select the Picture main menu item. 3 Press Menu/Set button to enter the sub menu. 4 Select Video NR. Then the cursor moves into the ¥ parts.
Setting the Picture Screen Form Description 16:9 16:9 video : No change. 4:3 video : Expands 4:3 video signal horizontally to fit the 16:9 screen. Panorama 16:9 video : No change. 4:3 video : Expands 4:3 video horizontally to fit the 16:9 screen and to minimize distortion, sides are expanded more than center. Zoom1 Expands 16:9 mode screen vertically. Zoom2 Expands Zoom 1 mode screen vertically. 4:3 16:9 video : The image is suppressed. 4:3 video : No expansion. There are gray areas besides the image.
Setting the Picture ( PC ) In PC Mode, you can adjust the H, V-Position, Divide, Phase and Auto Adjust. Also you can adjust them automatically. Position You can change H, V-Position, Divide and Phase in PC mode like usual PC monitors. You can also adjust them automatically. (Auto adjust function.) Picture 1 Press Menu/Set button to display the main OSD menu. 2 Select the Picture main menu with button. 3 Press Menu/Set button to enter the sub menu.
Setting the Picture ( PC ) H-Position ¥ ¥ Mismatch Match V-Position Phase 37
Setting the Sound In Sound Menu, you can adjust balance, MTS (Multi-Track Sound), AVC (Auto Volume Control) and select the equalizer settings. Adjusting the Sound Balance This control allows you to adjust the balance of the left and right speaker output. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Sound main menu. 3 Press Menu/Set button to enter the sub menu. 4 Select Balance and press Menu/Set button.
Setting the Sound User Adjust You can use the OSD menu to change the Treble, Bass, Balance, and DRC according to your preference. 1 Equalizer menu appear when you select Select User Mode (Previous page) User mode. 2 Select a gain bar with remote control and adjust it with User button on the button. 3 Press Exit button on the remote control to exit equalizer. The result will be saved automatically. 100Hz 500Hz 1.
Setting the Sound MTS (Multichannel Television Sound) Select sound signal format from the input source. There are Mono, Stereo, SAP sound formats. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Sound main menu with button on the remote control. 3 Press Menu/Set button to enter the sub menu.
Setting the Others In Setup Menu, you can adjust the transparency of the OSD menu and set PIP and others. Adjusting the Transparency of the OSD Window Adjust the transparency of the OSD menu. There are 8 step from 0 to 7. 1 Press Menu/Set button to display the main Setup OSD menu. Transparency 2 Select the Setup main menu with button on the remote control. ¥ 0 ¥ Off PIP Caption V-Chip 3 Press Menu/Set button to enter the sub menu. Advanced HDTV Setup 4 Select Transparency menu.
Setting the Others Changing the Size in PIP Change the size of the PIP window. There are 3 sizes: Small, Large, Twin. 1 Select Size and press 2 Adjust size function with button. button and press Menu/Set button. Small Large Twin Changing the Source in PIP Change the source of the PIP window. 1 2 PIP Select Source and press Menu/Set button to enter the sub menu. Then the PIP sub menu appear.
Setting the Others Picture Swap in PIP (Picture in Picture) Swap the sources of the main screen and the PIP window. Select Picture Swap and press Menu/Set button. Position in PIP PIP Change the position of the PIP window. 1 Select Position with button on the remote control and press Menu/Set button to enter the sub menu. Then the PIP sub menu appear. Size ¥ Small Source ¥ VIDEO ¥ Right Down Picture Swap Position 2 In sub menu, there are four positions.
Setting the Others TV Block in V-Chip You can Setup restrictions using the “TV Parental Guidelines” of Fcc. 1 Select TV Block with button on the remote control and press Menu/Set button to enter the sub menu. Then the TV Block sub menu appear. V-Chip TV Block Movie Block 2 You can independently lock the TV ratings. The locked TV (FCC) ratings are indicated by the symbol. Change Password V-Chip Blocking button and the Menu/Set button to activate the appropriate restrictions for TV (FCC) rating system.
Setting the Others Change Password in V-Chip 1 Select Change Password with button on the remote control and press Menu/Set button to enter the sub menu. Then the Password change sub menu appear. 2 Enter the new password with numeric buttons V-Chip TV Block Movie Block Change Password V-Chip Blocking Off ¥ on then remote control. Move Enter Password Password New Password V-Chip Blocking in V-Chip 1 Select V-Chip Blocking with Again Password **** **** V-Chip button on the remote control.
Setting the Others Set ID in Advanced Set the ID of TV for mass-controlling through the serial port. 1 Select Set ID menu. Then the cursor moves into the ¥ part. 2 Adjust with button and press Exit Advanced Set ID ¥ 0 Blue Back ¥ Off Language ¥ English Front Key Lock ¥ Off Film Mode ¥ Off button. Move Adjust Exit Blue Back in Advanced You can set to display blue-color screen instead of noise screen. 1 Select Blue Back menu. Then the cursor moves into the ¥ part.
Setting the Others Film Mode 1 2 Select Film Mode by pressing the cursor to choose “ON/OFF” Select “Off/On” with cursor.
Setting the Others HDTV Setup (HDTV Mode) Use this menu to set Time zone and put daylight saving time into effect. 1 Press Menu/Set button to display the main Setup OSD menu. Transparency 2 Select the Setup main menu with button on the remote control. ¥ 0 ¥ Off PIP Caption V-Chip 3 Press Menu/Set button to enter the sub menu. Advanced HDTV Setup 4 Select HDTV Setup and press Menu/Set button HDCCD Setup to enter the HDTV Setup menu. Then the HDTV Setup sub menu appear.
Setting the Others Daylight On Off Auto Move Enter Exit HDCCD Setup (HDTV Mode Only) Use this menu to select a font style, a font type, a text color, a back color, a edge type, a edge color and a display type of subtitles. 1 Press Menu/Set button to display the main Setup OSD menu. Transparency 2 Select the Setup main menu with button on the remote control. ¥ 0 ¥ Off PIP Caption V-Chip 3 Press Menu/Set button to enter the sub menu.
Setting the Time In the Time Menu, you can set the current time and auto power On/Off. Setting the Current Time Set the current time. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Time main menu. 3 Press Menu/Set button to enter the sub menu. 4 Select Time Set by pressing button. 5 Move the cursor by pressing and adjust time by button Time Time Set AM 01:01 On Time AM 08:30 On Channel Type ¥ TV On Channel ¥ 99 On Volume ¥ Off Time Sleep button.
Setting the Time Setting the On Channel Set the channel when the TV power turn on automatically. Available only when the time is set and On Time is ON. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Time main menu with button on the remote control. 3 Press Menu/Set button to enter the sub menu. Time Time Set AM 01:01 On Time AM 08:30 On Channel Type ¥ TV On Channel ¥ 99 On Volume ¥ Off Time 4 Select On Channel. Sleep 5 Then the cursor moves into the ¥ parts.
Setting the Time Setting the Off Time This TV can be set to turn off automatically at specific times that you choose. Before using the timer, you must set the TV's clock as described previously. 1 Press Menu/Set button to display the main Time OSD menu. 2 Select the Time main menu with button on the remote control. 3 Press Menu/Set button to enter the sub menu. 4 Select Off Time with control and press button on the remote button.
OSD Menu Tree Picture Mode Contrast Brightness Color Sharpness Tint (Only For NTSC) Recall Standard Vivid Mild User Temperature WARM2, WARM1, NORMAL, COOL1, COOL2 Color Enhancer Color Enhancer On/Off Video NR Video NR On/Off Screen Form 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3 Black Enhancer Black Enhancer On/Off Wide Mode 1024x768/1280x768/1360x768/1366x768 Sound Balance Sound Mode Standard Movie Music News User Equalizer (Press Set) Spatial Effect 100Hz, 500Hz, 1.
OSD Menu Tree Setup Transparency PIP Off, Small, Large, Twin Size Source Picture Swap Position Caption Right Down, Right Up, Left Up, Left Down CC1, CC2, Text1, Text2 V-Chip TV Block Movie Block Change Password V-Chip Blocking V-Chip Blocking On/Off Advanced Set ID National Selections Blue Back Blue Back On/Off Language English, French, Spanish Front Key Lock Film Mode Front Key Lock On/Off Film Mode On/Off HDTV Setup Time Zone Daylight HDCCD Setup 54 Atlantic, Eastern, Central, Mountain, Pac
OSD Menu Tree Time Time Set On Time On/Off On Time Channel Type TV On Channel Selection On Volume 1 ~ 100 Off Time Off Time On/Off Sleep Off, 10, 20, 30, 60, 90, 120, 150, 180 min TV Channel Type (ATV) Air Cable Channel Type (DTV) Air Cable Auto Scan Add/Del Fine Tune Edit 55
OSD Menu Tree PC MODE Picture Mode Contrast Brightness Color Sharpness Tint (Only For NTSC) Recall Standard Vivid Mild User Temperature WARM2, WARM1, NORMAL, COOL1, COOL2 Color Enhancer Color Enhancer On/Off Video NR Video NR On/Off Screen Form 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3 Black Enhancer Black Enhancer On/Off Wide Mode 1024x768/1280x768/1360x768/1366x768 Sound Balance Sound Mode Standard Movie Music News User Equalizer (Press Set) Spatial Effect AVC 56 Spatial Effect On/Off AVC On/Off
OSD Menu Tree Setup Transparency PIP Off, Small, Large, Twin Size Source Picture Swap Position Right Down, Right Up, Left Up, Left Down Advanced National Selections Set ID Blue Back Blue Back On/Off Language English, French, Spanish Front Key Lock Front Key Lock On/Off Film Mode On/Off Film Mode Time Time Set On Time On Time On/Off On Channel Selection On Volume 1 ~ 100 Off Time Sleep Off Time On/Off Off, 10, 20, 30, 60, 90, 120, 150, 180 min 57
Troubleshooting If your TV is not working properly, please scan this list of problems and possible solutions. It may save you time and money. Problem No picture & No sound Picture Ok & No sound • Press the VOL ( ) button. • Check the audio input signal. The remote control doesn't work • Check to see if there is any object between the Plasma Display and the remote control causing obstruction. • Check to see if the batteries are installed with the correct polarities.
6SHFLILFDWLRQ /&' Y]IGsjkG{} mGGk Gz k Gz¡ k Gt wGm jGy i tGpGy wpw pGj } {GtG w ok{}Gp jG{ Y]TpGX]GaG`GkGz }G\GtGO[aZGtGVGX]a`GG[GtP XZ]]GG^]_Gw GwG \WWGaGX \WWGVGGY XY_WGGXWY[GVG]Wo¡ hGTGGwpw OGGPGGGGG GG}G tGG
