FCC ID: U6DAL260V1 ATTACHMENT E. - USER’S MANUAL - HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No.
Contents Foreword Caution .......................................................................................................................................................... 3 Important Safety Instructions .................................................................................................................... 4 Precaution .....................................................................................................................................................
Contents Sound Control Spatial Effect ................................................................................................................................................. AVC (Auto Volume Control) ....................................................................................................................... MTS (Multichannel Television Sound) .................................................................................................... Digital Output (HDTV Mode Only) .............
Caution CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions Always be careful when using your the TV. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings.
Precaution In case of the following cases, unplug the unit from the wall outlet and contact qualified service center. - when power supply cord or plug is damaged. If liquid has been spilled on the unit or if alien objects have fallen into the unit. If the TV has been exposed to rain or water. If the TV does not operate normally by following the operating instructions. If the TV dropped or the cabinet has been damaged. When the TV exhibits a distinct change in performance.
Precaution Setting WARNING NO!! NO!! When installing the TV on a table, be careful not to place it too close to the edge of the table. - This may cause the TV to fall, causing serious injury to a child or adult, and serious damage to the TV. This TV is designed to be mounted horizontally (wide viewing). Any inquiry regarding its vertical position should be forwarded to the manufacture directly. 6 Provide ventilation for the TV.
Precaution Power CAUTION NO!! AC100-240V AC100-125V AC200-240V AC240 (SAA-TYPE) Use only the accessory cord designed for this product to prevent shock. The power supply voltage rating of this product is AC100-240V, the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC. When it is used by other power supply voltage, power cable must be changed. Consult your product dealer.
Precaution Operation CAUTION NO!! Upon completion of any service or repairs to this the TV, ask the service technician to perform safety checks to determine that the TV is in a safe operating condition. NO!! Do not place anything containing liquid on top of the TV. - This may cause a fire or could give an electric shock. In case of smoke or strange smell from the TV, switch it off, unplug it from the wall outlet and contact your dealer or service center.
Precaution Operation WARNING Do not use new battery with old one. Put the batteries in right direction (+/-). Only use the specified batteries. - This can lead a fire or electric shock caused by leakage liquid from abused batteries. - Otherwise, it can make a fire, injury and pollution caused by bursting of batteries. - This make cause damaged the TV or could give an electric shock. More than two people are necessary to move or take off the package due to the product’s weightiness.
9LHZLQJ WKH &RQWURO 3DQHO vzkGiGw mGw 7\SH %! vzkGi X Y Z [ \ ] ^ 7\SH $! joR joT }vsR }vsT tlu|Vzl{ puw|{Vlp{ z{hukGi vzkGiGm puw|{Gzlslj{ zGGGGGGGGGGymSGh}XVh}YSGzT}SGjSG wjTyniSGoktpXVYSGyzTYZYj }vsVjo V vy }vsVjoGTVR { GGjohuuls SGG GGGGGGG S U { GG}vs|tl SGG GGGGGGG S U { GGjoh
9LHZLQJ WKH &RQQHFWLQJ 3DQHO iGwGGq iGGGG{} X Y Z [ \ ] ^ _ ` XW k{}MGzly}pjlGwvy{ kTzOwjPz oktpX oktpY yzTYZY kTzOwjP jvtwvulu{ jvtwvulu{ z h} puw|{ zT}pklvGp XX XY XZ X[ X\ X] X^ X_ h}VzT}pklvGz }pklvGX }pklvGY zwkpmGOvPG sGv h {Twvy{ hjGw XX
Viewing the Connecting Panel D-Sub (PC) Sound Cable Connect (2) port. HDMI Cable Connect (3), (4) port. RS-232C Cable Connect (5) port. D-Sub (PC) Cable Connect (6) port. Component Cable Connect (7) port. Component & S-Video & AV Sound Cable Connect (11) and (8) port. RCA Cable Connect (12), (13) port. SPDIF Cable (Optical) Connect (14) port. Line Out Cable Connect (15) port. AV Cable Connect (9) port. S-Video Cable Connect (10) port. AC Power Cord Connect (18) port.
Viewing the Remote Control Button Description 1 POWER Turn the LCD on and off. MUTE Temporarily cut the sound and restore it. PICTURE There are 4 picture modes. Standard ➔ Vivid ➔ Mild ➔ User Pre.CH Turn to the previous program or exit OSD. 2 1 2 3 5 4 6 3 4 7 8 9 10 11 5 V.Size Choose the Screen Form. 16:9 ➔ 4:3 ➔ Panorama ➔ Zoom1 ➔ Zoom2 6 Favorite (Favourite) Tune to your next favorite program. 7 100 Display to tune the channels over 100. 8 INFO Display the current information.
Viewing the Remote Control 1 CH.ADD Add the current channel to memory. 2 CH.ERASE Erase the current channel to memory. 3 CC (CLOSED CAPTION) Set the close caption. Off ➔ Caption CC1 ➔ Caption CC2 ➔ Caption Text1 ➔ Caption Text2 4 V-CHIP Get into V-Chip menu. 5 MTS Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono ➔ Stereo ➔SAP • You can select only available modes depending on the source.
Viewing the Remote Control ON/OFF button: Change the PIP window mode. OFF ➔ Small ➔ Large ➔ Twin Small Large Twin SOURCE button: Change the source of the PIP window. The available sources are shown as below.
9LHZLQJ WKH 5HPRWH &RQWURO sGGi X wGGGGGGGGG GGU Y sGGhhh SGGGGG RGGTGGGGGU Z jGGGGGUG yGyGGyGj /HIW P )URQW 5LJKW 8SSHU /RZHU X]
,QVWDOODWLRQ {GzGpGOvPG 7DEOH 6WDQG ,QVWDOODWLRQ :DOO 0RXQW ,QVWDOODWLRQ RSWLRQDO 7KH 79 FDQ EH LQVWDOOHG RQ WKH GHVN DV VKRZQ DERYH ! 7KH 79 FDQ EH LQVWDOOHG RQ WKH ZDOO DV WKH SLFWXUH DERYH ! ,QVWDOO WKLV 79 D RQO\ LQ D ORFDWLRQ ZKHUH DGHTXDWH YHQWLODWLRQ LV DYDLODEOH 7DEOH VWDQG PRXQW PLQLPXP DOORZDEOH FOHDUDQFHV IRU DGHTXDWH YHQWLODWLRQ X^
&RQQHFWLQJ WKH 79 &DEOH hGj jGG{}Gj X jGG{}GhGGGG{}GGUGwGpuw|{ GGGGGG {}GGok{}GGvzkU Y |GjoRSGjoTGGGGGGG{}GGG GGUG Z wGwUjoGGGGGGGGGGUG hSG GGGGGGGGGGGUGmGGG GG{}GSGGG{}GG
&RQQHFWLQJ WKH 9&5 h}ZGp h}YGp zT}pklv zv|ukGG zT}pklvVh} h}XGp jGG}jy ~GzT}pklv jGGzT}GGGGzT}GGGG}jyGGG{}U jGs O~PSGyGOyPGGGOjPGGGGGGG}jyGGG{}U ~Gh}Gp jGGGGGGh}GGGGG}jyGGG{}U jGs O~PSGyGOyPGGGOjPGGGGGGG}jyGGG{}U ~G}jy X wGpuw|{ GGGGG
&RQQHFWLQJ WKH '9' jGGk}k fGjGGGGGGGGGk}kG NGSGwGGwGGGGG GGGG{}U fGjGGGGGGk}kG NGGs O~PGGyGOyPGGGGGs GyG GGGGGGG{}U fGjGGoktpGGGGk}kG fGGGGoktpGGGG{}U jvtwvulu{ zv|uk oktpX oktpY YW jvtwvulu{
Connecting the DVD How to Use 1 Turn on the DVD player. 2 Press INPUT button on the remote control of the TV and select HDMI, COMPONENT. Component Input Ports You can get better picture quality if you connect DVD player with component input sockets as below.
&RQQHFWLQJ WKH 6HW 7RS %R[ oGGj jGGGGGGGh}SGjvtwvulu{SGoktpGGwjGGGG{}UG hGGGhGGGGs O~PGGyGOyPGGGG GGGU oGG| X {GGGGGUG [_WV]Wo¡ [_WV]Wo¡ Y wGpuw|{ GGGGGGG \^]V\Wo¡ {}GGGjvtwvulu{ oktpSGGwjU \^]V\Wo¡ ^YWV\Wo¡ ^YWV]Wo¡ XW_WV\Wo¡ XW_WV]Wo¡ zGz jvtwvulu{ wj f f oktp f f oGGj ~Gh} j
&RQQHFWLQJ WKH 3& ' 6XE kTzGX\GO}nhPGGwj jGGwjGGG{} jGGwjGOX\PGGGGGGGGG GwjGGGwjGGGG{}U wGuU wGj X\GGGOGGGPU { GGwjG X {GGG{}GGGpuw|{ GGGG GwjGU Y {GGGwjGGGGGwjGU Z hGGwjGGGwGUG OzGZ]GUP X Y Z [ \ ] ^ _ ` XW XX XY XZ X[ X\ k yGOyP n
Displayable TV Specification Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 720 x 400 31.469 37.927 70.08 85.03 640 x 480 31.469 35.000 37.861 37.500 43.269 45.913 53.011 59.94 66.66 72.80 75.00 85.00 90.03 100.04 800 x 600 35.156 37.879 48.077 46.875 53.674 56.000 64.016 56.25 60.31 72.18 75.00 85.06 90.00 100.00 832 x 624 49.725 74.55 1024 x 768 48.363 56.476 60.023 68.677 60.00 70.06 75.029 84.997 1152 x 864 67.50 75.00 1280 x 1024 64.00 60.
Basic Operation Turning the TV ON/OFF Press the Power button on the remote control. The TV will turn on and you will be ready to use its features. You can also use the Power button on the front panel. Select Source Press INPUT button on the remote control. Then you can see the source list menu shown as below. INPUT 1. TV 2. HDTV 3. VIDEO1 4. VIDEO2 5. S-VIDEO/AV Select the source to watch with button on the remote control and press the Menu/Set button. 6. COMPONENT 7. PC RGB 8. HDMI1 9.
OSD Menu Structure • OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. • Press the Menu/Set button on the remote control to see the main OSD menu.
Setting the Channel ( ATV ) Choosing the Channel Type Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV. (i.e., an antenna, a standard cable system). 1 Press Menu/Set button to display the main TV OSD menu. 2 Select the TV main menu. 3 Press Menu/Set button to enter the sub menu. 4 Select Channel Type(ATV) or Channel Type(DTV).
Setting the Channel ( TV ) Analog Scan precedes Digital Scan on Auto Scan mode. Notes • You can enter the TV menu and HDTV menu in TV mode only. (When you watch a TV programm.) • ATV: Analog TV • DTV: Digital TV (ATSC) Adding or Deleting the Channels You can add or erase the current channel. 1 Press Menu/Set button on the remote control TV to display the main OSD menu. 2 Select the TV main menu with button on the remote control.
Setting the Channel ( TV ) Editing the Channels Edit Favorite Program list You can store of your favorite channels for each available input source. Then, when you press the Favorite button on the remote control, the TV display only the favorite channels you previously stored, allowing you to quickly and easily find frequently wanted channels. 1 Press Menu/Set button to display the main TV OSD menu. 2 Select the TV main menu.
Setting the Channel ( TV ) Digest Function With the Digest function, you can select a TV program watching 16 program at once. This function works in TV mode only. 1 Press the DIGEST button on the remote control. 2 You can make off the Digest Function by pressing DIGEST button again. 30 16 side windows are renewed clockwise. Next memorized program appear in the renewed windows. 1 To choose the program, press the channel number with the numeric buttons on the remote control.