FCC ID: U6DAL320V1 ATTACHMENT E. - USER’S MANUAL - HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No.
Contents Foreword Caution .......................................................................................................................................................... 3 Important Safety Instructions .................................................................................................................... 4 Precaution .....................................................................................................................................................
Contents Sound Control Spatial Effect ................................................................................................................................................. AVC (Auto Volume Control) ....................................................................................................................... MTS (Multichannel Television Sound) .................................................................................................... Digital Output (HDTV Mode Only) .............
Caution CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions Always be careful when using your the TV. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings.
Precaution In case of the following cases, unplug the unit from the wall outlet and contact qualified service center. - when power supply cord or plug is damaged. If liquid has been spilled on the unit or if alien objects have fallen into the unit. If the TV has been exposed to rain or water. If the TV does not operate normally by following the operating instructions. If the TV dropped or the cabinet has been damaged. When the TV exhibits a distinct change in performance.
Precaution Setting WARNING NO!! NO!! When installing the TV on a table, be careful not to place it too close to the edge of the table. - This may cause the TV to fall, causing serious injury to a child or adult, and serious damage to the TV. This TV is designed to be mounted horizontally (wide viewing). Any inquiry regarding its vertical position should be forwarded to the manufacture directly. 6 Provide ventilation for the TV.
Precaution Power CAUTION NO!! AC100-240V AC100-125V AC200-240V AC240 (SAA-TYPE) Use only the accessory cord designed for this product to prevent shock. The power supply voltage rating of this product is AC100-240V, the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC. When it is used by other power supply voltage, power cable must be changed. Consult your product dealer.
Precaution Operation CAUTION NO!! Upon completion of any service or repairs to this the TV, ask the service technician to perform safety checks to determine that the TV is in a safe operating condition. NO!! Do not place anything containing liquid on top of the TV. - This may cause a fire or could give an electric shock. In case of smoke or strange smell from the TV, switch it off, unplug it from the wall outlet and contact your dealer or service center.
Precaution Operation WARNING Do not use new battery with old one. Put the batteries in right direction (+/-). Only use the specified batteries. - This can lead a fire or electric shock caused by leakage liquid from abused batteries. - Otherwise, it can make a fire, injury and pollution caused by bursting of batteries. - This make cause damaged the TV or could give an electric shock. More than two people are necessary to move or take off the package due to the product’s weightiness.
Viewing the Control Panel OSD Button Position Front Panel OSD Button 1 2 3 4 5 6 7 CH+ CHVOL+ VOLMENU/SET INPUT/EXIT STAND BY OSD Button Function INPUT SELECT Select the signal source from multiple input sources such as RF, AV1/AV2, S-Video, Component, PC-RGB, HDMI1/2, RS-232C VOL/CH/ OR VOL/CH -/+ To change the CHANNEL, press button first and change the channel with , buttons. To change the VOLUME, press button first and change the volume with , buttons. To change the CHANNEL and VOLUME.
Viewing the Connecting Panel Back Panel and Jacks Back panel of the TV 1 2 3 4 5 6 7 8 9 10 DTV& SERVICE PORT D-Sub(PC)Sound HDMI1 HDMI2 RS-232 D-Sub(PC) COMPONENT COMPONENT Sound AV INPUT S-VIDEO Iutput 11 12 13 14 15 16 17 18 19 20 AV/S-VIDEO Sound VIDEO 1 VIDEO 2 SPDIF (Optical) Line Out Air Antenna CableAntenna RJ-11 AC Power Speaker 11
Viewing the Connecting Panel D-Sub (PC) Sound Cable Connect (2) port. HDMI Cable Connect (3), (4) port. RS-232C Cable Connect (5) port. D-Sub (PC) Cable Connect (6) port. Component Cable Connect (7) port. Component & S-Video & AV Sound Cable Connect (11) and (8) port. RCA Cable Connect (12), (13) port. SPDIF Cable (Optical) Connect (14) port. Line Out Cable Connect (15) port. AV Cable Connect (9) port. S-Video Cable Connect (10) port. AC Power Cord Connect (18) port.
Viewing the Remote Control Button Description 1 POWER Turn the LCD on and off. MUTE Temporarily cut the sound and restore it. PICTURE There are 4 picture modes. Standard ➔ Vivid ➔ Mild ➔ User Pre.CH Turn to the previous program or exit OSD. 2 1 2 3 5 4 6 3 4 7 8 9 10 11 5 V.Size Choose the Screen Form. 16:9 ➔ 4:3 ➔ Panorama ➔ Zoom1 ➔ Zoom2 6 Favorite (Favourite) Tune to your next favorite program. 7 100 Display to tune the channels over 100. 8 INFO Display the current information.
Viewing the Remote Control 1 CH.ADD Add the current channel to memory. 2 CH.ERASE Erase the current channel to memory. 3 CC (CLOSED CAPTION) Set the close caption. Off ➔ Caption CC1 ➔ Caption CC2 ➔ Caption Text1 ➔ Caption Text2 4 V-CHIP Get into V-Chip menu. 5 MTS Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono ➔ Stereo ➔SAP • You can select only available modes depending on the source.
Viewing the Remote Control ON/OFF button: Change the PIP window mode. OFF ➔ Small ➔ Large ➔ Twin Small Large Twin SOURCE button: Change the source of the PIP window. The available sources are shown as below.
Viewing the Remote Control Loading the Batteries 1 Press on the cover and slide in the direction of the arrow. 2 Load two AAA batteries, taking care that the + and - ends face the correct direction. 3 Close the cover until it clicks.
Installation Table Stand Installation (Optional) 4 inch (10.16cm) 4 inch (10.16cm) 4 inch (10.16cm) 2.36 inch (5.99cm) < The TV can be installed on the desk as shown above. > 1.18 inch (Min) (3cm) • Table stand mount minimum allowable clearances for adequate ventilation.
Connecting the TV Cable Air Antenna Cable Cable Antenna Cable Connection the TV Cable 1 Connect the TV Antenna cable to the TV input jack. Press INPUT button on the remote control and select TV or HDTV on OSD. 2 Use CH+, CH- button or numeric button to change TV program for your program selection. 3 Press Pre.CH button on the remote control to tune the previous program. 4 Also, you can tune to cable service provided programs using the cable box.
Connecting the VCR AV3 Input AV2 Input S-VIDEO SOUND of S-VIDEO/AV AV1 Input Connecting the VCR With S-VIDEO Connect a S-Video cable to the S-Video jacks of the VCR and the TV. Connect L (White), R (Red) sound cable (Composite) to the sound jacks of the VCR and the TV. With AV Input Connect a composite cable to the AV video jacks of the VCR and the TV. Connect L (White), R (Red) sound cable (Composite) to the sound jacks of the VCR and the TV.
Connecting the DVD Connecting the DVD • Connect the three separate component video cables to the DVD player's Y, Pb and Pr jacks and to the component jacks on the TV. • Connect the audio cable to the DVD player's audio L (White) and R (Red) jacks and to the L and R audio jacks beside the component jacks on the TV. • Connect the HDMI cables to the DVD player’s and to the HDMI cables on the TV.
Connecting the DVD How to Use 1 Turn on the DVD player. 2 Press INPUT button on the remote control of the TV and select HDMI, COMPONENT. Component Input Ports You can get better picture quality if you connect DVD player with component input sockets as below.
Connecting the Set Top Box How to Connect Connect set top box video inputs to AV, COMPONENT, HDMI or PC port on the TV. Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs. How to Use 1 Turn on the set top box. 2 Press INPUT button on the remote control of the TV and select COMPONENT HDMI, or PC.
Connecting the PC ( D-Sub ) D-Sub 15pin (VGA) from PC Connecting a PC to the TV Connect a PC (15pin) video cable between the video output port on the PC and the PC port on the TV. Pin Configuration 15pin signal cable (based on protruded pin). To watch the PC screen 1 Turn on the TV and press INPUT button to select the PC mode. 2 Turn on the PC and check for the PC requirement. 3 Adjust the PC screen in Position menu. (See 36 page.) Pin No.
Displayable TV Specification Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 720 x 400 31.469 37.927 70.08 85.03 640 x 480 31.469 35.000 37.861 37.500 43.269 45.913 53.011 59.94 66.66 72.80 75.00 85.00 90.03 100.04 800 x 600 35.156 37.879 48.077 46.875 53.674 56.000 64.016 56.25 60.31 72.18 75.00 85.06 90.00 100.00 832 x 624 49.725 74.55 1024 x 768 48.363 56.476 60.023 68.677 60.00 70.06 75.029 84.997 1152 x 864 67.50 75.00 1280 x 1024 64.00 60.
Basic Operation Turning the TV ON/OFF Press the Power button on the remote control. The TV will turn on and you will be ready to use its features. You can also use the Power button on the front panel. Select Source Press INPUT button on the remote control. Then you can see the source list menu shown as below. INPUT 1. TV 2. HDTV 3. VIDEO1 4. VIDEO2 5. S-VIDEO/AV Select the source to watch with button on the remote control and press the Menu/Set button. 6. COMPONENT 7. PC RGB 8. HDMI1 9.
OSD Menu Structure • OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. • Press the Menu/Set button on the remote control to see the main OSD menu.
Setting the Channel ( ATV ) Choosing the Channel Type Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV. (i.e., an antenna, a standard cable system). 1 Press Menu/Set button to display the main TV OSD menu. 2 Select the TV main menu. 3 Press Menu/Set button to enter the sub menu. 4 Select Channel Type(ATV) or Channel Type(DTV).
Setting the Channel ( TV ) Analog Scan precedes Digital Scan on Auto Scan mode. Notes • You can enter the TV menu and HDTV menu in TV mode only. (When you watch a TV programm.) • ATV: Analog TV • DTV: Digital TV (ATSC) Adding or Deleting the Channels You can add or erase the current channel. 1 Press Menu/Set button on the remote control TV to display the main OSD menu. 2 Select the TV main menu with button on the remote control.
Setting the Channel ( TV ) Editing the Channels Edit Favorite Program list You can store of your favorite channels for each available input source. Then, when you press the Favorite button on the remote control, the TV display only the favorite channels you previously stored, allowing you to quickly and easily find frequently wanted channels. 1 Press Menu/Set button to display the main TV OSD menu. 2 Select the TV main menu.
Setting the Channel ( TV ) Digest Function With the Digest function, you can select a TV program watching 16 program at once. This function works in TV mode only. 1 Press the DIGEST button on the remote control. 2 You can make off the Digest Function by pressing DIGEST button again. 30 16 side windows are renewed clockwise. Next memorized program appear in the renewed windows. 1 To choose the program, press the channel number with the numeric buttons on the remote control.
Setting the Picture Changing the Picture Mode Your the TV has 3 automatic factory preset picture settings (Standard, Vivid and Mild). You can choose Standard, Vivid or Mild by pressing Picture button on the remote control (or by making a selection from the menu). Or you can select User which automatically recalls your personalized picture settings. Picture 1 Press Menu/Set button to display the main OSD menu. 2 Select the Picture main menu. 3 Press Menu/Set button to enter the sub menu.
Setting the Picture Contrast Adjust brightness difference between bright part of the screen and dark part. Distinct ¥ Vague Dark ¥ Bright Decrease ¥ Increase Less sharp ¥ Sharp Green color is deeper ¥ Red color is deeper Brightness Adjust brightness of the screen. Color Adjust deep and light color of the screen. Sharpness Adjust vividness of the screen. Tint Adjust the balance between green and yellow.
Setting the Picture Changing the Color Temperature Your TV has 5 screen temperatures (color settings). 1 Press Menu/Set button to display the main Picture OSD menu. 2 Select the Picture main menu. 3 Press button to enter the picture menu. 4 Select Temperature and press Menu/Set button to enter the sub menu. Then the picture-temperature under menu appear.
Setting the Picture Video NR (Noise Reduction) This function automatically filters out and reduces the image noise and improves picture quality where receiving weak signals. 1 Press Menu/Set button to display the main Picture OSD menu. 2 Select the Picture main menu item. 3 Press Menu/Set button to enter the sub menu. 4 Select Video NR. Then the cursor moves into the ¥ parts.
Setting the Picture Screen Form Description 16:9 16:9 video : No change. 4:3 video : Expands 4:3 video signal horizontally to fit the 16:9 screen. Panorama 16:9 video : No change. 4:3 video : Expands 4:3 video horizontally to fit the 16:9 screen and to minimize distortion, sides are expanded more than center. Zoom1 Expands 16:9 mode screen vertically. Zoom2 Expands Zoom 1 mode screen vertically. 4:3 16:9 video : The image is suppressed. 4:3 video : No expansion. There are gray areas besides the image.
Setting the Picture ( PC ) In PC Mode, you can adjust the H, V-Position, Divide, Phase and Auto Adjust. Also you can adjust them automatically. Position You can change H, V-Position, Divide and Phase in PC mode like usual PC monitors. You can also adjust them automatically. (Auto adjust function.) Picture 1 Press Menu/Set button to display the main OSD menu. 2 Select the Picture main menu with button. 3 Press Menu/Set button to enter the sub menu.
Setting the Picture ( PC ) H-Position ¥ ¥ Mismatch Match V-Position Phase 37
Setting the Sound In Sound Menu, you can adjust balance, MTS (Multi-Track Sound), AVC (Auto Volume Control) and select the equalizer settings. Adjusting the Sound Balance This control allows you to adjust the balance of the left and right speaker output. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Sound main menu. 3 Press Menu/Set button to enter the sub menu. 4 Select Balance and press Menu/Set button.
Setting the Sound User Adjust You can use the OSD menu to change the Treble, Bass, Balance, and DRC according to your preference. 1 Equalizer menu appear when you select Select User Mode (Previous page) User mode. 2 Select a gain bar with remote control and adjust it with User button on the button. 3 Press Exit button on the remote control to exit equalizer. The result will be saved automatically. 100Hz 500Hz 1.
Setting the Sound MTS (Multichannel Television Sound) Select sound signal format from the input source. There are Mono, Stereo, SAP sound formats. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Sound main menu with button on the remote control. 3 Press Menu/Set button to enter the sub menu.
Setting the Others In Setup Menu, you can adjust the transparency of the OSD menu and set PIP and others. Adjusting the Transparency of the OSD Window Adjust the transparency of the OSD menu. There are 8 step from 0 to 7. 1 Press Menu/Set button to display the main Setup OSD menu. Transparency 2 Select the Setup main menu with button on the remote control. ¥ 0 ¥ Off PIP Caption V-Chip 3 Press Menu/Set button to enter the sub menu. Advanced HDTV Setup 4 Select Transparency menu.
Setting the Others Changing the Size in PIP Change the size of the PIP window. There are 3 sizes: Small, Large, Twin. 1 Select Size and press 2 Adjust size function with button. button and press Menu/Set button. Small Large Twin Changing the Source in PIP Change the source of the PIP window. 1 2 PIP Select Source and press Menu/Set button to enter the sub menu. Then the PIP sub menu appear.
Setting the Others Picture Swap in PIP (Picture in Picture) Swap the sources of the main screen and the PIP window. Select Picture Swap and press Menu/Set button. Position in PIP PIP Change the position of the PIP window. 1 Select Position with button on the remote control and press Menu/Set button to enter the sub menu. Then the PIP sub menu appear. Size ¥ Small Source ¥ VIDEO ¥ Right Down Picture Swap Position 2 In sub menu, there are four positions.
Setting the Others TV Block in V-Chip You can Setup restrictions using the “TV Parental Guidelines” of Fcc. 1 Select TV Block with button on the remote control and press Menu/Set button to enter the sub menu. Then the TV Block sub menu appear. V-Chip TV Block Movie Block 2 You can independently lock the TV ratings. The locked TV (FCC) ratings are indicated by the symbol.
Setting the Others Change Password in V-Chip 1 Select Change Password with button on the remote control and press Menu/Set button to enter the sub menu. Then the Password change sub menu appear. 2 Enter the new password with numeric buttons V-Chip TV Block Movie Block Change Password ¥ V-Chip Blocking Off on then remote control. Move Enter Password Password New Password V-Chip Blocking in V-Chip 1 Select V-Chip Blocking with Again Password **** **** V-Chip button on the remote control.
Setting the Others Set ID in Advanced Set the ID of TV for mass-controlling through the serial port. 1 Select Set ID menu. Then the cursor moves into the ¥ part. 2 Adjust with button and press Exit Advanced Set ID ¥ 0 Blue Back ¥ Off Language ¥ English Front Key Lock ¥ Off Film Mode ¥ Off button. Move Adjust Exit Blue Back in Advanced You can set to display blue-color screen instead of noise screen. 1 Select Blue Back menu. Then the cursor moves into the ¥ part.
Setting the Others Film Mode 1 2 Select Film Mode by pressing the cursor to choose “ON/OFF” Select “Off/On” with cursor.
Setting the Others HDTV Setup (HDTV Mode) Use this menu to set Time zone and put daylight saving time into effect. 1 Press Menu/Set button to display the main Setup OSD menu. Transparency 2 Select the Setup main menu with button on the remote control. ¥ 0 ¥ Off PIP Caption V-Chip 3 Press Menu/Set button to enter the sub menu. Advanced HDTV Setup 4 Select HDTV Setup and press Menu/Set button HDCCD Setup to enter the HDTV Setup menu. Then the HDTV Setup sub menu appear.
Setting the Others Daylight On Off Auto Move Enter Exit HDCCD Setup (HDTV Mode Only) Use this menu to select a font style, a font type, a text color, a back color, a edge type, a edge color and a display type of subtitles. 1 Press Menu/Set button to display the main Setup OSD menu. Transparency 2 Select the Setup main menu with button on the remote control. ¥ 0 ¥ Off PIP Caption V-Chip 3 Press Menu/Set button to enter the sub menu.
Setting the Time In the Time Menu, you can set the current time and auto power On/Off. Setting the Current Time Set the current time. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Time main menu. 3 Press Menu/Set button to enter the sub menu. 4 Select Time Set by pressing button. 5 Move the cursor by pressing and adjust time by button Time Time Set AM 01:01 On Time AM 08:30 On Channel Type ¥ TV On Channel ¥ 99 On Volume ¥ Off Time Sleep button.
Setting the Time Setting the On Channel Set the channel when the TV power turn on automatically. Available only when the time is set and On Time is ON. 1 Press Menu/Set button to display the main OSD menu. 2 Select the Time main menu with button on the remote control. 3 Press Menu/Set button to enter the sub menu. Time Time Set AM 01:01 On Time AM 08:30 On Channel Type ¥ TV On Channel ¥ 99 On Volume ¥ Off Time 4 Select On Channel. Sleep 5 Then the cursor moves into the ¥ parts.
Setting the Time Setting the Off Time This TV can be set to turn off automatically at specific times that you choose. Before using the timer, you must set the TV's clock as described previously. 1 Press Menu/Set button to display the main Time OSD menu. 2 Select the Time main menu with button on the remote control. 3 Press Menu/Set button to enter the sub menu. 4 Select Off Time with control and press button on the remote button.
OSD Menu Tree Picture Mode Contrast Brightness Color Sharpness Tint (Only For NTSC) Recall Standard Vivid Mild User Temperature WARM2, WARM1, NORMAL, COOL1, COOL2 Color Enhancer Color Enhancer On/Off Video NR Video NR On/Off Screen Form 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3 Black Enhancer Black Enhancer On/Off Wide Mode 1024x768/1280x768/1360x768/1366x768 Sound Balance Sound Mode Standard Movie Music News User Equalizer (Press Set) Spatial Effect 100Hz, 500Hz, 1.
OSD Menu Tree Setup Transparency PIP Size Off, Small, Large, Twin Source Picture Swap Position Caption Right Down, Right Up, Left Up, Left Down CC1, CC2, Text1, Text2 V-Chip TV Block Movie Block Change Password V-Chip Blocking V-Chip Blocking On/Off Advanced Set ID National Selections Blue Back Blue Back On/Off Language English, French, Spanish Front Key Lock Film Mode Front Key Lock On/Off Film Mode On/Off HDTV Setup Time Zone Daylight HDCCD Setup 54 Atlantic, Eastern, Central, Mountain, Pa
OSD Menu Tree Time Time Set On Time On/Off On Time Channel Type TV On Channel Selection On Volume 1 ~ 100 Off Time Off Time On/Off Sleep Off, 10, 20, 30, 60, 90, 120, 150, 180 min TV Channel Type (ATV) Air Cable Channel Type (DTV) Air Cable Auto Scan Add/Del Fine Tune Edit 55
OSD Menu Tree PC MODE Picture Mode Contrast Brightness Color Sharpness Tint (Only For NTSC) Recall Standard Vivid Mild User Temperature WARM2, WARM1, NORMAL, COOL1, COOL2 Color Enhancer Color Enhancer On/Off Video NR Video NR On/Off Screen Form 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3 Black Enhancer Black Enhancer On/Off Wide Mode 1024x768/1280x768/1360x768/1366x768 Sound Balance Sound Mode Standard Movie Music News User Equalizer (Press Set) Spatial Effect AVC 56 Spatial Effect On/Off AVC On/Off
OSD Menu Tree Setup Transparency PIP Size Off, Small, Large, Twin Source Picture Swap Position Right Down, Right Up, Left Up, Left Down Advanced National Selections Set ID Blue Back Blue Back On/Off Language English, French, Spanish Front Key Lock Front Key Lock On/Off Film Mode On/Off Film Mode Time Time Set On Time On Time On/Off On Channel Selection On Volume 1 ~ 100 Off Time Sleep Off Time On/Off Off, 10, 20, 30, 60, 90, 120, 150, 180 min 57
Troubleshooting If your TV is not working properly, please scan this list of problems and possible solutions. It may save you time and money. Problem No picture & No sound Picture Ok & No sound • Press the VOL ( ) button. • Check the audio input signal. The remote control doesn't work • Check to see if there is any object between the Plasma Display and the remote control causing obstruction. • Check to see if the batteries are installed with the correct polarities.
Specification - 32" LCD 32" LCD TV Function and Display Specification Display Size 32-Inch 16 : 9 Diagonal Screen Display Mode Variable 5 Modes (4:3 Mode / 16:9 X 4 Modes) Pixel Format 1366 X 768 Physical Pixel Contrast Ratio 500 : 1 Brightness 500 cd/m2 Max Input Resolution 1280 X 1024 / 60Hz PIP Advanced multi-windows viewing PIP (picture in picture) with four selectable window positions on Video mode Input Compatible Multiple input compatible Video Advanced motion digital/Motion-Adaptive De-interlace pro