User's Manual
Setting the Sound
40
Select sound signal format from the input source. There are Mono, Stereo, SAP sound formats.
Press Menu/Set button to display the main
OSD menu.
Select the Sound main menu with button
on the remote control.
Press Menu/Set button to enter the sub menu.
Select MTS and press Menu/Set button to enter
the sub menu. Then the MTS sub menu appear.
Select the MTS format with and
press Menu/Set button.
Use this menu to select Sound Type, PCM or Dolby Digital on SPDIF Output mode.
Press Menu/Set button to display the main
OSD menu.
Select the Sound main menu with button
on the remote control.
Press Menu/Set button to enter the sub menu.
Select Digital Output and press Menu/Set button
to enter the sub menu. Then the Digital Output
sub menu appear.
Select the PCM or Dolby Digital and press Exit button.
MTS (Multichannel Television Sound)
Digital Output (HDTV Mode Only)
1
2
3
4
5
Notes
(Optional)
The available sound formats are displayed.
Usually, you can see Mono and Stereo.
MTS (Multichannel Television Sound) supports
english, french and spanish. The available
languages vary according to TV programs from
broadcasting stations. (HDTV mode Only)
1
2
3
4
5
Sound
Balance
Sound Mode
Spatial Effect
AVC
MTS
Digital Output
User
Off
On
Stereo
Dolby Digital
1
¥
¥
¥
¥
¥
¥
Move Enter Exit
Mono
Stereo
SAP
Move Select Exit
MTS
Sound
Balance
Sound Mode
Spatial Effect
AVC
MTS (Only MTS Button)
Digital Output
User
Off
On
Stereo
Dolby Digital
1
¥
¥
¥
¥
¥
¥
Move Enter Exit
PCM
Dolby Digital
Move Enter Exit
Digital Output
Dolby Trademark Acknowledgement
and License Notice:
Manufactures under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
Select PCM for general speakers L, R and select
Dolby Digital for 5.1 channel speakers system.