User's Manual

40
Setting the Picture
Your the TV has 3 automatic factory preset picture settings (Standard, Vivid and Mild). You can choose
Standard, Vivid or Mild by pressing Picture button on the remote control (or by making a selection from the
menu). Or you can select User which automatically recalls your personalized picture settings.
Press Menu/Set button to display the main
OSD menu.
Select the Picture main menu.
Press Menu/Set button to enter the sub menu.
Select Mode and press Menu/Set button to enter
the sub menu. Then the picture sub mode appear.
Select the picture mode and press Menu/Set button.
You will see the picture setting bars. Just press
Exit button on the remote control. You can adjust
each values of the picture setting, but the
changed values are stored as in User mode.
You can change the Contrast, Brightness, Color, and Sharpness according to personal preference in User mode.
Select the item to adjust with button.
Press Menu/Set button.
Adjust the item with button.
To cancel all adjust, select Recall and press
Menu/Set button.
NNootteess
Alternative method: Just press the Picture button on the remote
control. Each time it is pressed, different mode is selected.
Changing the Picture Mode
1
2
3
4
1
2
3
4
5
6
User mode require more settings.
It has an under menu: See next page.
Tint feature is enabled while input signal
is NTSC mode.
For a more detailed description of these
settings, see the next page.
Adjusting the User Mode
Select User Mode (Previous page)
Picture
Mode
Temperature
Color Enhancer
Video NR
Aspect Ratio
Black Enhancer
Custom
Normal
Off
On
16:9
Off
➛➛
➛➛
➛➛
➛➛
➛➛
➛➛☎☎
❿
❿
❿
❿
❿
❿
Move Enter Exit
Mode
Standard
Vivid
Mild
User
Move Select Exit
User
Contrast
Brightness
Color
Sharpness
Tint
Recall
50
50
50
50
0
➛➛
➛➛
➛➛☎☎
➛➛
➛➛
❿
❿
❿
❿
❿
Move Adjust Exit
User
Contrast
Brightness
Color
Sharpness
Tint
Recall
50
50
50
50
0
➛➛
➛
➛
➛➛☎☎
➛➛
➛➛
❿
❿
❿
❿
❿
Move Adjust Exit