User's Manual

17
Installation
Table Stand Installation (Optional) Wall Mount Installation (Optional)
< The TV can be installed on the desk as shown above. >
• Table stand mount minimum allowable clearances for
adequate ventilation.
4 inch (10.16cm)
2.36 inch
(5.99cm)
4 inch
(10.16cm)
4 inch
(10.16cm)
1.18 inch (Min)
(3cm)
Installation
Table-Stand User’s Guide
Screws
< The TV can be installed on the wall as the picture above. >
1.18 inch (Min)
(3cm)
4 inch (10.16cm)
2.36 inch
(5.99cm)
4 inch
(10.16cm)
4 inch
(10.16cm)
• Install this TV a only in a location where adequate
ventilation is available.
3. Insert a Table-Stand as below.
4. -Screw Up (4 x 30)
b
Table-Stand User’s Guide
1. Lay the set down.
2. Fit the set with the stand.
4. -Screw Up (4 x 12)
a
a
a
5 - 4 x 12
a
b
b
b
Insert
2 - 4 x 30
Screws
Screws
2 - 8 x 25
a
Stand Hole
Insert
Table-Stand
Stand Base
a
a
a
Stand Base
Stand Bar
1. Insert Stand Bars into the Stand
Base as shown below.
2. -Screw Up (8 x 25)