User Manual

WARRANTY CARD
ATTENTIONS:
- Please read the return procedures and warranty policy
carefully on www.camcasle.com before sending items back
to point-of-purchase.
- Please ll the card and send it to your reseller together with
the product if your product's warranty is valid.
S.N:
Date of Purchase:
Product Model:
RMA Number:
Return Reason:
Customer Name:
TEL:
E-mail:
Address:
EN-3 EN-4 EN-5 EN-6 EN-7EN-1 EN-8 EN-9 EN-10
Thank you for purchasing CamCasle products. Please read
this instruction manual carefully before use and keep it for
your convenience.
If you have any questions or comments, please contact us
via our ocial email address:
The followings are the precautions for using the dash
cam:
● This product only suppos charger with 5V voltage,
otherwise the machine may be damaged.
● Inse or unplug the Micro SD card in the o state.
Otherwise it will cause abnormal or damage to the device.
● Please use the high-speed Micro SD card that meets
SDHC specications and with the brand logo.
● Please use the 16GB-256GB Micro SD card.
● Video les may be lost or damaged if the Micro SD card is
removed during recording.
● Video les may be lost or damaged if the camera is
dropped or crashed.
● Micro SD card must be installed correctly to ensure
proper function and video recording.
● Please use the original accessories, and do not
disassemble the product.
● Please abide by the relevant national laws and
regulations, and do not use this product for any illegal
purposes.
● If you have any questions or need more suppo with
the product, please contact our after-sales sta.
● Inse the Micro SD Card
Inse the Micro SD card as shown in the picture until it
clicks. (The Micro SD card maximum suppos up to 256GB.)
● Wipe the place that need to be installed and ensure
the window is clean.
● Inse the SD card and USB Cable C po in the R30
Front camera.
● Rear Camera Installation
1) Select an installation location like the windscreen and wipe it
with a d cloth.
2) Power o฀ the R30 Rear camera and connect the cable to the
front camera.
3) Peel the protection lm o฀ the sticky pad and camera lens.
4) Fix the rear camera on the selected location.
● Map
The driving tracks can be viewed on the map.
● Auto Connected Recorder ON/OFF (Default: ON)
With WiFi connection, the APP can connect
to the device.
● APP Language
简体中文/ English / 日本語/ Deutsche / Français / Italiano
/Español etc. APP includes more than 20 languages.
(Default: Mobile System Language)
The operation pages of the APP displays the language you
have selected.
● Help
The Common Q&A for Dash Camera. If you have any
questions, please send them to our ocial email address
(suppo@camcasle.com), we have professional technical
suppo and customer seice team at your seice.
● Clear Cache
● Remove the 3M adhesive lm from the base, and stick
the dash cam in the dotted box of the static sticker.
● Rotate the R30 Front camera to adjust the angle of the
lens. It is recommended to adjust the lens slightly
downward to ensure that the camera’s view is parallel to
the horizontal ground. (Suggestion: the ground/sky ratio is
approximately 6�4.)
● Stick the static sticker near the top of the car
windshield.
● Remove the Micro SD card
Press the Micro SD card inward and remove it from the
slot.
● Use of the Micro SD Card
a. Please check the inseion direction of Micro SD card,
incorrect inseion direction may damage the camera
and Micro SD card.
b. Please use a high-speed Micro SD card that meets
SDHC specications; high-speed Micro SD card will
have the Class 10 logo.
c. For your better experience, we recommend you to
format the SD card before you sta using it.
Steps to format:
①use the card reader and format the SD card on the
computer. (you can repeat the format several times)
②inse the SD card into the R30 dash cam and format it
again in the APP page.
d. Please note that the SD card is a consumable product,
and its seice life decreases with the number of times
that the data is read. It is recommended that you
replace the SD card regularly.
e. In order to extend the seice life of SD card, you can
format the SD card once eve two weeks. Do not plug
and unplug the SD card frequently, which will cause
damage to the SD card.
f. Please make sure to inse and remove the SD card
when the power is o.
g. It is recommended to use a 16GB-256GB SD card.
[A] R30 Front Camera*1
[B] R30 Rear Camera*1
[C] R30 Rear Camera Cable（6M）*1
[D] 3M Adhesive Base *1 (Mounted On The Dash Cam)
[E] R30 Front Camera USB Data Cable *1
[F] CamCasle R30 User Manual *1
[G] Car Charger *1
[H]Static Sticker *2
suppo@camcasle.com.
Introduction Package Contents Operation Instruction
2. APP Function Introduction
(After Connecting)
The dash cam WiFi is an APP hotspot that provides a
wireless connection to the device for access only.
The camera does not have networking capabilities. The
smaphone will not actively select the dash cam’s WiFi for
connection. If the WiFi is disconnected, please re-connect
it again.
Attention
The "CamCasle" App is produced by CamCasle and is
pa of CamCasle products. If you have any
questions or comments about the use of the app,
please feel free to contact us via our ocial email
address:suppo@camcasle.com. Thank you for
your suppo to CamCasle.
Special Note
APP Introduction
1. Camera Oveiew
Rear Camera
2. Product Installation
3. LED Indicator Description
1. APP Main Inteace Introduction
Specications FAQ
Warranty
● Scan the QR code to download the "CamCasle" APP.
● Make sure the dash cam is powered on.
● Open "CamCasle" APP, click "connect DVR" on the page
of APP.
● Enter the WiFi setting page.
● Select the WiFi name "CamCasle-R30-XXXX" in the WiFi
list to connect (default password: 12345678).
● Change the password: Enter the new password and click
OK. After password changed, reconnect the dash cam and
manually with new password.
(Please take a screenshot to save your updated password,
changing password is not recommended.)
4. APP Connection
2.1 SD Card Installation
2.2 Dash Cam Installation
Operation Instruction
1.1 Settings
EN-2
1）Power Button； 2）Backward/Emergency Recording；
3）Emergency Shot/Upward； 4）Recording/Play Back/Downward；
5）System Setting/Delete； 6）Front Camera Lens；
7）Micro SD Card Slot； 8）Front Adhesive Base；
9）USB-C Charging Po； 10）LED Indicator；
11）Heat Diuser Holes； 12）Microphone； 13）Speaker；
1）Mini USB Charing Po；
2）Rear Camera Lens；
3）Adhesive Base
Main Processor
Sensor（Front Camera）
Sensor（Rear Camera）
Apeure（Front Camera）
Apeure（Rear Camera）
Viewing Angle（Front Camera）
Viewing Angle（Rear Camera）
Video Resolution（Front Camera）
Video Resolution（Rear Camera）
Display（Front Camera）
Photo Format
Video Format
Video Codec
Micro SD Maximum Suppo
Mic
Speaker
Light Source Frequency
G-Sensor
GPS Module
Automatic Recording
Collision Detection
Date and Time Stamp
Emergency File Protection
Seamless Loop Recording
APP Control
Power Supply
Operating Temperature
Storage Temperature
NT96670
Sony IMX415
GC2053
F1.75
F2.2
140 degree
140 degree
2160p
1080P
L960 * W 376mm（3.16inch）
JPEG
MP4
H.264
256GB
Built-in Microphone
Built-in Speaker
Default 50HZ
Built-in G-Sensor
√
√
√
√
√
√
√
5V/2.4A
-10°C ~ 60°C / 14°F~140°F
-20°C ~ 70°C / -4°F~158°F
Unable to
Loop Video
Check if the Micro SD
card is full
Connect the APP and format
the Micro SD card (back up the
last video and picture before
formatting)
Screen
Stuttering
Micro SD card does
not match
Check if the Micro SD card is a
high-speed card with Class 10
rate and the capacity is not less
than 16GB.
Unable to
Take Pictures
or Videos
Check if the Micro SD
card is full
Connect to APP and format the
Micro SD card (back up the last
video and picture before
formatting)
Stop
Autocratically
When Recording
HD video data is huge,
SD card is not suitable
Use SDHC compatible high speed
Micro SD card, high-speed micro
SD card will have C10 logo.
Prompt "File
Error"
Foggy Image
Downtime
Error occurred when
storing data on the
Micro SD card, resulting
in incompatible les
The lens is stained
Other reasons
Downtime
Connect the APP and format the
Micro SD card.
Please contact after-sales
seice.
Sho press the reset button to
resta.
Wipe the lens clean.
LED Indicator Status
Light out
Red Light Always On
Red Light Flashing
Status Description
OFF
Powered on (Not recording)
Recording In Progress
Connection Records
APP Settings
Dash Cam Model
WIFI Number
Connect/Enter DVR
DVR
Local Album
“+”
EN-15 EN-16 EN-17 EN-18 EN-19 EN-20 EN-21
The R30 is covered by a 1-year manufacturer warranty.
For more information, please visit www.camcasle.com
2.1 Icon Function Introduction
2.2 Disconnect
2.3 Dash Cam Settings
3.5 Share Videos from Your Phone Album
Share the photos and videos in your phone album.
Attention
The Wi-Fi of the car recorder has no networking function,
if you need to access the Internet, please switch the
network.
j. Format TF Card
Click to delete all the les in the SD card. Note: Files
cannot be recovered after formatting. Please download
and save impoant les in advance.
Related Information:
TF Card Available Space
Check the remaining capacity of the SD card.
Version
Check the version information of the dash cam.
k. Camera Settings Reset
Click to disconnect the CamCasle APP from the dash cam.
● Settings（Click the settings icon to enter this page）
a. Resolution
Selectable recording resolution: 1080P 30FPS / 720P
30FPS. (Default: 1080P 30FPS)
b. Looping Video
This function determines the recording length of each
video, select from: 1 Minute / 3 Minutes / 5 Minutes.
(Default: 3 minutes)
c. Record Audio
Select this function, sta recording.
When turned o, stop recording. (Default: ON)
d. Volume
This function determines the volume level of voice
prompts. Select from four settings : OFF / Low / Medium /
High. (Default: Medium)
EN-14
EN-11 EN-12
EN-13
1.5 Local Album
● Loop
In the APP le, the dash cam records regular video.
● Event
In the APP le, the dash cam records emergency
video. (locked video)
● Photo
In the APP le, the dash cam shows the taken photos.
Note
Need to download the les from SD card to APP,
please refer to User Manual 3.2
● Photo Share
Share the photos to social media platform.
● Video Share
Capture 10-second video to share. (Only suppo
10-second video)
Attention
If you need to share the full video, download the video
le to your own mobile album, and then share it through
your mobile album.
● Track List
Share the driving tracks and map information to social
media platform.
Attention
You can refer to User Manual 3.5 for the specic sharing
process.
Power
Emergency Recording
Backward
Emergency Shot
Upward
Voice Pickup Playback
Downward
Setting Delete
Button Functions
Tips：Sho Press:Less than 1s；Long Press: Longer than 3s
Recording Status: Sho press to switch display
modes
Other Status: Long press to turn the device on/o
Recording Status: Record a video manually in
emergency
Setting Status: Switch backward to the previous page
Recording Status: Take a photo manually in an emergency
Setting Status: Switch back to the previous page
Photos Playback Status: Switch to the previous photo
Videos Playback Status: Sho press to pause/play the video
Recording Status: Long press to turn on/o the microphone;
Sho press to enter the playback status
Setting Status: Sho press to move downward
Playback Status: Sho press to switch to the next video/photo
Recording Status: Sho press to enter the setting status
Playback Status: Delete
Other Status: Conrm/Function
3.1View Files on the Micro SD Card
3.2 Save Files from the Micro SD Card
to APP’s Local Album
3.Download and Share Photos & Videos
Select from Loop/Event/ Photo les
that you want to share in the SD
card le, click download, and the le
can be saved to APP’s local album.
Click “Enter DVR” to enter this page.
Continue to click the icon of the
picture below to view photos and
videos.
Device model
Failure Cause Solution
R30
CamCasle-R30
√
1.2 View & Delete the Connection Records
1.3 DVR
1.4 “+”
Long press to view the WiFi information of the dash cam
connected by CamCasle APP. Swipe to the left to delete
the connection records.
Click "Enter DVR" to connect to the R30 dash cam.
3.3 Share APP Files
3.4 Save App Files to Your Phone Album
Click the icon in the picture to share
photos or 10-second video clips.
Directly save the photos or videos to
your phone album.
Crop Video (10s)
Edit Video (10s)
Share Video (10s)
Displays the current cached data capacity of the APP and
can be cleared. (Attention: the cache refers to the data
such as video thumbnails, not including the videos in the
SD card)
● About
CamCasle APP Version Information. If you want to
upgrade your app, you can go to the app store or contact
us to download it.
Please stick the electrostatic sticker near the top of the car windshield.
Please stick the dash cam inside the dotted box of the electrostatic sticker.
(Please inse the SD card and USB power cable before sticking.)
Attention
1.Please wipe the car windshield before use.
2.Please keep the electrostatic sticker clean and it can repeat to use for
several times.
Thank you for purchasing CamCasle R30
A
C
D
G
H
E
B
NOTE: This equipment has been tested and found to
comply with the limits for a
Class B digital device, pursuant to pa 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful inteerence in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
inteerence to radio communications. However, there is no
guarantee that inteerence will not occur in a paicular
installation. If this equipment does cause harmful
inteerence to radio or television reception, which can be
determined by turning the equipment o and on, the user
is encouraged to t to correct the inteerence by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit dierent
from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician
for help
Changes or modications not expressly approved by the
pay responsible for compliance could void the user's
authority to operate the equipment. This device complies
with Pa 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)this device may not cause harmful inteerence, and
(2)this device must accept any inteerence received,
including inteerence that may
cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure
limits set foh for an uncontrolled environment. This
equipment shall be installed and operated with󶀅
minimum distance 20cm between the radiator & body.
12
6
8
11
13
10
7
CamCasle-R30
1
2
Rear Camera
Front Camera
2
1
Rear
User Manual
R30
F
● Plug the end of the R30 Front
camera USB cable into the car charger,
and inse the car charger into the
cigarette lighter.
● After the R30 Front camera is
installed and connected to the
power supply, the recorder
automatically turns on and
records video, and the LED
indicator lights up, indicating
that it enters working condition.
CamCasle-R30
CamCasle-R30
CamCasle-R30
2
3
9
Settings
Disconnection
10-Second Video
Photo Shoot
Album
Road Condition
Monitoring
Action Track
Mop Full Screen
Location
Dash cam settings
Disconnect from dash cam
Record a 10-second video
Take a picture
View les stored on SD card
Monitor the map to show real-time
road conditions
Record location change tracks
Display full screen map
Keep the current location centered on
the page
e. WDR
This function reduces the brightness dierence of the
recorded screen and adjusts the over-bright and
over-dark areas, so the video eect will be clearer.
(Default: ON)
f. Light Frequency
Default Frequency 50 Hz.
g. Time Setting
This function displays the current recording time.
h. EV Setting
This function can change the EV value of the dash cam.
The adjustment range is from 2 to -2. If the brightness is
too high, it is recommended to lower the EV value.
(Default: 0)
i. Stamp Setup
Turn on this function, the recorded video shows
watermark. (Default: ON)
Click to restore the dash cam system settings to the
facto state. All settings will be restored to their default
values.
Main Function Description
1. Collision Detection
2. Seamless Recording
● Turn on collision sensitivity (o, low, medium, high
switchable), and the default is Medium.
● When vibration or collision detection is triggered
during driving, dash cam will lock the current video into
the emergency folder, the locked le will not be
overwritten, so impoant events will be saved and can be
used as evidence.
● The locked les will be saved in the emergency folder,
which will automatically overwrite the earliest locked les
when that folder is full. When the "Emergency Files" folder
accumulates to 40% of the card capacity, the camera will
overwrite the earliest video.
Attention
Please transfer impoant videos to your PC or other
storage location (e.g. external hard drive) regularly.
To maintain good read peormance, the Micro SD card
should be formatted eve 1-2 weeks.
There will be no time inteal between each two consecu-
tive recorded videos. If the loop recording length is
selected as 1 minute, then the recorded video periods, for
example, will be 06�00�00-06�01�00, 06�01�00-06�02�00,
and 06�02�00-06�03�00.
User Manual
Thank you for purchasing CamCasle R30.
R30
For more information, please visit our ocial website
www.camcasle.com
Your valuable comments and suggestions on improving
CamCasle products are welcomed!
suppo@camcasle.com [e-mail]
www.camcasle.com