Installation & Assembly

Assembly
Step 2:Torsion bar and arm assembly:
keep the four face aligned, connect the torsion bar(4-1),(4-3) with the connectors piece(5) and secure it with
the corresponding bolts as figure below.
For 10x8FT L1:5.51inch L2:3.54inch
Step 1:Roller assembly:
keep roller aligned,assemble the roller (2-1),(2-3)with the connector(3) and secure it with corresponding
bolts(15) as figure below:
5
Then assembly the arm(17-1)and (17-2) to the torsion bar(4) as figure below.Two arms need in the same direction,
the rope of arm connot be unlocked until the whole assembly are complete.
4
17-1
17-2
2-1
2-3
3
2-1
3
2-3
15
15
4-1
4-3
5
20
Note: