User Guide

Windows NT 4.0
Caution:
• Before installing the Display driver, make sure your Windows NT is
installed in VGA mode and work fine.
• Please install the Windows NT 4.0 service pack 3 before installing
the video driver. Otherwise, the system may cause setup failed
and won’t be able to start up.
• D: present the drive containing the installation CD.
Setup VGA Mode
1. Follow Setup Driver steps 1~3.
2. When the Select Device dialog
box appears on screen, select
Show all devices item to show
all VGA devices.
3. Select Standard display types
from the manufacturers and
select VGA compatible display
adapter from the Display then
click OK button.
4. After you complete installing
Standard VGA driver, click Close
button and restart Windows to
enable the VGA driver.
Setup VGA Driver (Manual Setup)
1. Start NT and insert the
Installation CD into the CD-ROM
drive.
2. Click mouse right button on the
desktop and select Properties
from the pop-up menu, or double-
click Display icon from the
Control Panel folder.
3. Select Settings->Display Type and
then click Change button.