User Guide

33
4.3 Configuring by Terminal Program via Console Cable
The console configuration can be used when the user cannot access the
AOpenRouter 101/201 from network.
This section explains how to configure and use a Terminal program. The terminal
communications program provided with Windows 95 is called “ HyperTerminal” .
Please configure as instructed below:
1. Power off the AOpenRouter 101/201. Connect the AOpenRouter 101/201’s
serial port directly to your PC’s serial port using the enclosed serial cable.
2. Configure your terminal emulation program. Find the HyperTerminal program as
below. Click to enter.
3. Check if the “ Null Modem.ht” is built-in. If not, double click “ Hypertrm.exe” to
build a new one.