User Guide
Table Of Contents
- AK79G-V/AK79G-VN/AK79D-1394/A79G-1394
- Hardware Installation
- About ¡§Manufacturer Upgrade Optional¡¨ and ¡§User Upgrade Optional
- JP14 Clear CMOS Data
- CPU Installation
- AOpen Overheat Protection (O.H.P.) Technology
- Full-range Adjustable CPU Core Voltage
- Setting CPU Frequency
- Supported CPU Frequency
- CPU and Housing Fan Connector
- JP27/28 Keyboard/Mouse Wakeup Jumpers
- DIMM Sockets (128-Bit DDR Dual Channel)
- STBY LED
- Front Panel Connector
- ATX Power Connector
- AC Power Auto Recovery
- IDE and Floppy Connector
- S/PDIF Connector (for AK79D-1394 and AK79G-1394)
- Super 5.1 Channel Audio Effect
- TV Output Connector (for AK79G-V, AK79G-VN and AK79G-1394)
- IrDA Connector
- AGP (Accelerated Graphic Port) 8X Expansion Slot
- AGP Protection Technology and AGP LED
- Support 10/100 Mbps LAN Onboard (For AK79G-VN, AK79D-1394 and AK79G-1394)
- CNR (Communication and Network Riser) Expansion Slot
- Game Port Bracket Supported
- Color Coded Back Panel
- COM2 Connector
- Support Six USB Connectors
- IEEE 1394 Connectors (for AK79D-1394 and AK79G-1394)
- Case Open Connector
- CD Audio Connector
- AUX-IN Connector
- Front Audio Connector
- Battery-less and Long Life Design
- CPU Over-current Protection
- AOConfig Utility
- Resetable Fuse
- 2200£gF Low ESR Capacitor
- Enlarged Aluminum Heatsink
- Open JukeBox Player
- Vivid BIOS technology
- The noise is gone!! ---- SilentTek
- Driver and Utility
- Phoenix Award BIOS
- Glossary
- AC97 CODEC
- ACPI (Advanced Configuration & Power Interface)
- ACR (Advanced Communication Riser)
- AGP (Accelerated Graphic Port)
- AMR (Audio/Modem Riser)
- ATA (AT Attachment)
- BIOS (Basic Input/Output System)
- Bluetooth
- CNR (Communication and Networking Riser)
- DDR (Double Data Rate) RAM
- ECC (Error Checking and Correction)
- EEPROM (Electronic Erasable Programmable ROM)
- EPROM (Erasable Programmable ROM)
- EV6 Bus
- FCC DoC (Declaration of Conformity)
- FC-PGA (Flip Chip-Pin Grid Array)
- FC-PGA2 (Flip Chip-Pin Grid Array)
- Flash ROM
- Hyper Threading
- IEEE 1394
- Parity Bit
- PCI (Peripheral Component Interface) Bus
- PDF Format
- PnP (Plug and Play)
- POST (Power-On Self Test)
- PSB (Processor System Bus) Clock
- RDRAM (Rambus Dynamic Random Access Memory)
- RIMM (Rambus Inline Memory Module)
- SDRAM (Synchronous DRAM)
- SATA (Serial ATA)
- SMBus (System Management Bus)
- SPD (Serial Presence Detect)
- USB 2.0 (Universal Serial Bus)
- VCM (Virtual Channel Memory)
- Wireless LAN ¡V 802.11b
- ZIP file
- Troubleshooting
- Technical Support
- Product Registration
- How to Contact Us

45
A
A
K
K
7
7
9
9
G
G
-
-
V
V
/
/
A
A
K
K
7
7
9
9
G
G
-
-
V
V
N
N
/
/
A
A
K
K
7
7
9
9
D
D
-
-
1
1
3
3
9
9
4
4
/
/
A
A
K
K
7
7
9
9
G
G
-
-
1
1
3
3
9
9
4
4
O
O
n
n
l
l
i
i
n
n
e
e
M
M
a
a
n
n
u
u
a
a
l
l
C
C
o
o
l
l
o
o
r
r
C
C
o
o
d
d
e
e
d
d
B
B
a
a
c
c
k
k
P
P
a
a
n
n
e
e
l
l
The onboard I/O devices are PS/2 Keyboard, PS/2 Mouse, serial ports COM1 and VGA (AK79G-V, AK79G-VN and Ak79G-1394),
LAN (AK79G-VN, AK79D-1394, AK79G-1394), Printer, USB
, AC97 sound and game port. The view angle of drawing shown here
is the back panel of the housing.
PS/2 Keyboard: For standard keyboard, which is using a PS/2 plug.
PS/2 Mouse: For PC-Mouse, which is using a PS/2 plug.
USB Port: Available for connecting USB devices.
Parallel Port: To connect with SPP/ECP/EPP printer.
COM1 Port: To connect with pointing devices, modem or others serial devices.
VGA Connector: To connect with PC monitor.
Speaker Out: To External Speaker, Earphone or Amplifier.
Line-In: Comes from the signal sources, such as CD/Tape player.
MIC-In: From Microphone.
MIDI/Game Port: For 15-pin PC joystick, game pad or MIDI devices.
PS/2 Mouse
Connector
SPP/EPP/ECP Parallel Port
USB2.0
Ports
RJ45 10/100 LAN Jack
(For AK79G-VN, AK79D-1394
and AK79G-1394)
PS/2
Ke
y
board
USB2.0 Ports
COM 1 Port
VGA Port
(For AK79G-V, AK79G-VN and
Ak79G-1394)
Line-In
MIC-In
Speaker Out