Specifications

Using OTTO-CAD
Unless you work with CAD data on a daily basis, figuring out its information
such as scale, axis inversions, and board rotation would be difficult. The
software provides assistant in form of the OTTO-CAD. To enable OTTO-CAD
put the word AUTO in the Scale section of the CXF header. I.e.
.Scanspection_CAD_EXCHANGE
Version 5
BoardName MyBoard
Scale AUTO
.DATA_START
..
..
When trying to import CAD with Scale set to AUTO, OTTO-CAD dialog will
appear:
The OTTO-CAD will prompt the user to place "boxes" onto a few selected
Devices (usually 3 to 6 Devices) near the perimeter of the board. Then base
on the user's placements the software determines the scaling, orientation and
axis direction of the CAD data, and convert the data for CAD import.