Specifications

Additional CAD Utilities
Two other features only accessible when placing the third reference Device
during CAD import:
Graph CAD Data is useful when user have to train a board that do not have
reference ID silkscreen on the board, and layout drawing is not available.
Graph CAD Data graphs the CAD data into the Map View. Printing the Map
View afterward will produce a layout drawing of the board.
Resync Centroid Position the following dialog will appear upon selecting
item:
The Re-establish centroids is useful when user need to modify a Board
Setup created with an older version of the software (Version 3.60 or earlier),
where centroid position are not stored to the correct centroid position for all
Devices. Resync Centroid Position re-read the CXF file and correct the
centroid position of the Device in the Device list.
The Move Devices is used to correct position error for all Devices by re-
establishing Device positions base on centroid data from the CXF file. The
feature is very useful for fixing a Board Setup which lost its fiduical marks.
This feature can also be used to correct Board Setup's Device position in case
that the Board Setup was trained on a machine with bad calibration.