Specifications

Unclassified
Missing Device
Wrong Device
Wrong Polarity
Skewed Device
Lead Bridge
Solder Defect
Other
Users must save the file as DEFECT.INF in the same directory where the
SCANSPECTION.EXE file is located, usually C:\Program Files\AOI.
It is possible to use a user defined category number in the DEFECT.INF file.
Simply put the number in parenthesis in front of the description, such as:
(000) Unclassified
(702) Missing Device
(704) Wrong Device
(707) Wrong Polarity
(603) Skewed Device
(501) Lead Bridge
(502) Solder Defect
(999) Other
User can disable the Cancel and/or Ignore buttons on the Review Failed
Device dialog by editing the Scanspection.ini file:
[MainFrame]
ReviewLevel=0
..
The review level only take effect in Operator Mode
Level 0 - (Default) Enable both Cancel and Ignore
Level 1 - Cancel disable, users are forced to review all the defects.
Level 2 - Both Ignore and Cancel disable.
User may choose to have the machine to track the false rejects of the
machine. To do so set the LogFalseCall item in the Scanspection.ini to 1.
Also, set first item in the defect category to something like “False Call”.
[MainFrame]
..