Specifications

Map Window Current Position Mismatch
In the Map View a red rectangle represents the current position of the Image.
It should represent the correct position with respect to the board. If for some
reason the map view current position does not correspond to the actual Image
position, the following steps should be taken to rectify the situation:
1. Press the Home button on the toolbar. The system should return to the
bottom left corner of the board. (If the system does not stop at the bottom
left corner of the board, please read the next section about restoring home
position.)
2. Point the mouse to the Map View; click right mouse button to pull down a
menu.
3. From the menu select Set Map Reference.
4. The software will ask you to confirm that you are on the bottom left corner
of the board. You should be because you are at home position. Press Yes
on the dialog.