Specifications

ROI box and Actual Device Position Mismatch
The system overlays a rectangle on all the Devices that were trained. When
the Image moves, those rectangles should stay with the corresponding Device
on the board. If they do not, the following steps need to be taken:
The rectangle could be slightly off the Device; that is normal, but if the
rectangles are drawn at completely wrong positions, the home position may
have been lost. To restore the home position, simply press the Align button,
on the Toolbar. If the align process finishes successfully, the home
should be restored.
If the alignment cannot be completed, you may set the home position
manually by positioning the Image so that the cross hair lines up with the
bottom left corner of the board. Select Positional | Set Position from the
main menu. The following dialog will display:
Press the Set to Home button followed by the OK button