Specifications

Step Through Devices
Solder and lead inspections require a more accurate definition for the
inspection area compared to "Device's marking" inspection. The Step Through
feature of the software has been extended to allow the fine adjustment of the
inspection area. The Step Through feature can be accessed via the File menu
Step Through Devices.
During Step Through, the arrow keys on the keyboard move the inspection
area one pixel at a time while the space bar is used to move to the next
Device.
Device movement during Step Through in "normal mode" (as shown above) is
the same as Device Move, Device Label Only, only the templates move.
Device movements during Step Through Devices in Device Outline mode is
the same as Device Move, Entire Device, and all the components of the
Device move together.
During normal walk through each Device is moved individually, however, it is
possible to move multiple Devices the same amount. This function is called
Offset Device Position. To access this function, place the mouse cursor on
the walk through dialog box and depress the right mouse button to pull down a
menu.