Specifications

User can select the package type from the list of available package.
How to Create a New Package?
A package is the definition of position and size of the lead and solder areas
plus their inspection parameters. To create a new package user should go to
a Device, add the lead and solder areas, fine tune their position and size then
assign inspection parameter. Then give the package a name and add the
package to the package library.
Here are the steps to add the new package to the package library:
1. Select Edit Device from the Device menu, select Extended Parameter
page.
2. Press the Package Lib button
3. Press Create New button
4. Enter a name for the package (e.g. 1206C, SO14 etc) when prompted.
Then press OK
If you make modification to a package definition on a Device, you can update
the package library by the following steps:
1. Select Edit Device from the Device menu, select Extended Parameter
page.
2. Press the Package Lib button
3. Press Update button.
4. The software will ask if you want to update the package definition on other
instances of the Device in the Device list. Select Yes to update.