User Guide

Installation
Hardware Installation
1. Turn OFF the computer, unplug the power cord
and open the computer case.
2. Select an available ISA expansion slot and
remove the expansion slot cover. Carefully
insert the adapter into the slot until it is fully
seated. Secure the adapter.
3. Replace the computer cover and connect the
network adapter. Reconnect the computer’ s
power cord and plug it into the power outlet.
Configuration and Diagnostics
Before you configure this adapter, make sure you
finished hardware installation.
• Running Plug and Play mode
It does not require the configuration operation
to install the Ethernet adapter in a computer
that is compatible with Plug and Play
specification or is running Microsoft Windows