User Guide

Product Features
l Meets PCI Local Bus specification, Rev.2.0
l Compliant to IEEE 802.3 10BASE-2 and
10BASE-T standards.
l Supports PCI Plug and Play configuration.
l Supports Full-Duplex Ethernet function to double
channel bandwidth.
l Automatic port selection between 10BASE-2
interface(BNC) and 10BASE-T interface(RJ-45)
l Support 100ohm STP/UTP cables using
Category 3, 4 or 5
l On-board socket for remote Boot ROM.
l LED Indicators
One LED on the bracket provides LINK
indicators.
State Description
On Normal data packet are received or Link
integrity pulse is detected
Off * When no twisted-pair connected
* No power source into hub
* Twisted-pair is faulty
* Non-10BASE-T device connected at
the other end of the twisted pair
* A twisted-pair wire that exceeds
recommended length