User Guide

Installation
Hardware Installation
1. Turn OFF the computer, unplug the power
cord and open the computer case.
2. Select an available PCI expansion slot and
remove the expansion slot cover. Carefully
insert the adapter into the slot until it is fully
seated. Secure the adapter.
3. Replace the computer cover and connect the
network adapter. Reconnect the computer’ s
power cord and plug it into the power outlet.
Configuration
This Ethernet adapter is automatically configured
when you power on the computer. For certain
computers, however, you must modify BIOS by
entering CMOS SETUP utility to enable “ PCI
Device” and map INTA to an appropriate address.
Please refer to the system documentation for
details on configuration the PCI SYSTEM BIOS.