Table of Contents FULL PACKAGE CONTENT… … … .… ................2 INTRODUCTION… … ........… … … … .… … … … .… .3 ABOUT FAST ETHERNET… … … … … … .… … … … 3 ABOUT AUTO-NEGOTIATION… … … … … … ..… … .4 PRODUCT FEATURES… … … ..… … … … … … … … .5 SOFTWARE DRIVER SUPPORT … … ...… … ...........6 INSTALLATION… … … … … … … … … ..… … … … … 7 HARDWARE I NSTALLATION… … … … … ..… … … … 7 DRIVER I NSTALLATION… … … … … … … … .… … … 8 BOOT ROM INSTALLATION… … … … … … … … … 8 TROUBLESHOOTING… … … … … … … ..… … .… .
Full Package Content The adapter package should contain the following items: • One PCI 10/100 Ethernet adapter • User’ s guide • Driver diskette Please inform your dealer immediately should there be any incorrect, missing or damaged parts.
Introduction The 10/100 Based-Tx Fast Ethernet Adapter card is a 32-bit 10/100Mbps Ethernet network interface card for PCI local bus-compliant PCs. It supports the PCI bus mastering architecture which allows data to be transferred very fast with low CPU utilization and auto-negotiation feature which makes it possible to combine one common type of Ethernet cabling-an RJ-45 connector for twistedpair cabling that can be used for both 10Mbps and 100Mbps connection.
About Auto-negotiation Auto-negotiation is an IEEE 802.3 procedure of negotiating the highest data flow capability between the device (in this case, our Adapter) and their links partner (some other device). The data flow information, to be negotiated, consists of the data speed (10Mbps or 100Mbps) and data transfer (half-duplex or full-duplex communication). The physical process of auto-negotiation requires only a few milliseconds to choose the fastest communications capability between the two devices.
Product Features Designed for versatility and performance, the 32-bit PCI bus 10/100Mbps Fast Ethernet Adapter provides the following features: • Operates in a PCI Bus Master slot of a Pentium/ Pentium-Pro/ Pentium-II computer, independent of CPU speed. • PCI Bus Master memory access, for high throughput and low CPU demand. • Plug and Play installation. • 100Mbps Fast Ethernet or 10Mbps Ethernet data transfer, selected via auto-negotiation.
Software Driver Support l Diagnostic Program l ODI Novell Client Dos, Novell Client 32 for Dos, Netware Sever 3.x, 4.x, 5.0 l NDIS 2.x, 3.x, 4.x, 5.0 Windows 2000, Windows 98, Windows 95 OSR2, Windows 95, Windows NT, WindowsWPW3.
Installation Installation of a 10/100Mbps PCI bus Fast Ethernet Card requires Hardware installation first, then BIOS and Software installation. Hardware Installation 1. 2. 3. 4. Turn OFF the computer, unplug its power cord and open the computer case. Insert the contact edge of the 10/100Mbps PCI bus Fast Ethernet Card into the connector of any available PCI Bus Master expansion slot. Press the card firmly into the connector and ascertain that the card contacts are fully seated in the connector.
Driver Installation Before you connect the 10/100Mbps PCI bus Card to the network, you have to install the network driver first. The driver for each networking operating system is under a separate directory. A HELP.EXE file under root directory lists the information and detailed installation procedure of all the available drivers. Boot ROM Installation The optional Boot ROM device allows you to connect a diskless workstation to the network.
2. 3. Execute the SETUP.EXE file to enable the Boot ROM function by selecting the appropriate Boot ROM address from the setup menu. Refer to the installation procedure provided by Networking Operating System, Here lists the reference subjects under two commonly used Networking Operating Systems.
Troubleshooting If you experience any problems with the adapter, first verify that the appropriate driver is loaded, that the proper grade of cable is employed for the network connection, and that the supporting hub is functioning properly. 1. Ascertain that the adapter card is fully and firmly seated in the slot connector. 2. Check the length and rating of connecting cables. 3. Ascertain that the adapter's PCI slot is not deactivated at the BIOS level.
Specifications Standards: IEEE 802.3 10BASE-T IEEE802.3u 100BASE-TX PCI Local Bus specification Rev.2.1 Host interface: PCI 2.1 Bus (Bus Master) Data Bus Width: 32-bit PCI bus mastering Jumperless Hardware Auto-negotiation functionality LED indicators: Link, Activity Media Interface: RJ-45 Emissions: FCC Class B CE Certification, Class B VCCI-II Dimensions: 120mm x 58mm Storage Temperature: -25°C ~ 70°C Operating Temp.
