User Guide

Driver Installation
Before you connect the 10/100Mbps PCI bus Card
to the network, you have to install the network driver
first. The driver for each networking operating
system is under a separate directory. A HELP.EXE
file under root directory lists the information and
detailed installation procedure of all the available
drivers.
Boot ROM Installation
The optional Boot ROM device allows you to
connect a diskless workstation to the network.
Perform the following steps to install your Boot
ROM device:
Note: Install the optional remote boot ROM before
installing the card.
Note: Before handling the remote boot ROM chip,
discharge any static electricity on your body by
touching a grounding surface such as the chassis of
the PC.
1. Align the notch and pins of the ROM chip with
notch and pinholes on the socket. Insert the
Boot ROM into the socket on the adapter until it
is firmly seated.