User Guide

2. Hardware Installation

1. Unpack the print server package and check all the items listed in section

1.2.

2. Connect the print server to the printer you want to share on the network

by standard USB cable.

3. Connect the power adapter to the print server.

4. The print server will perform the Power-On-Self-Test (POST) after it is

powered on. The Status LED will flash 6 times to indicate that the print

server is ready.

NOTE1 : MUST use the power adapter shipped with the print server, do NOT use any other

power adapter from any sources.

NOTE2: To prevent the compatibility problem between print server and a few printer, it is

recommand that you power on the print server before the printer.