User Guide

3.2 Administrator Installation and Setup

The Administrator Installation can be performed on Windows 95/98/Me/NT

/2000/XP with the same user interface. Before the installation, please verify

that your network protocol is installed on your PC (TCP/IP, IPX and/or

NetBEUI). It will be helpful in your installation process.

1. Insert the CD shipped along with the print server into your CD-ROM drive.

The Autorun.exe program should be executed automatically by Windows. If

not, run Autorun.exe manually from CD-ROM drive’s root directory.

2. The "Installation Manager" will be displayed on the screen as following.

3. Click “Administrator Installation” and the “Utillities Setup” window will

be displayed.

4. Click “Next”, and specify the destination folder where the utilities will be

installed.