User Guide

You can assign a meaningful name for the management consideration. But
note that, this name will be the “Identifier” for the Peer-to-Peer Printing
(PTPP).
10. Click “Next” to configure network protocol in the following screen.
In the system default, IPX and NetBEUI protocols are enabled.
About the TCP/IP, you can either (1) assign a fixed IP address for the print
server or (2) configure it later by the configuration utility.
11. Click “Next”, and the configuration summary is displayed in the window.
Now, you have completed the “Print Server Setup”. By clicking “Next”. Your
system will perform “Add network port” of the print server to your PC.
22