User Guide

12. Finally, the “Installation complete” window is displayed to indicate that
the Administrator Installation procedure is finished.
After the installation, you have completed the following tasks,
Install all utilities and drivers to the administrator’s PC.
Configure the print server (including the print server name and network
protocol)
Add the network port of the print server to the administrator’s PC.
Now, you have completed the administrator’s setup for most of the network
environment. You can then perform the “Client Installation” procedure
(section 3.4) on all client’s sides of the network.
If you want to print from this administrator’s PC to the print server, all you
need to do is to perform Windows’ standard “Add Printer” procedure as
described below.
23