User Guide

4.2 Windows NT/2000 Server Installation and Setup

Please follow the procedures described below for installation and construct a

peer-to-peer connection (PTPP) between Windows NT/2000 Server and Print

Server.

Windows NT Server

Windows 98

Windows 2000

* TCP/IP

* IPX

* NetBEUI

TCP/IP

IPX

TCP/IP

PTPP

Queue

Step1.

If this is your first time installing print server, please install the administrator

software on Windows NT/2000 server first. Refer to section 3.2 for

installation instructions.

If your network has already installed a working print server and your

Windows NT/2000 server has not yet installed the PTPP driver, please install

the client software. Refer to section 3.4 and 3.5 for installation instructions.

Step2.

Please add/configure the Peer-to-Peer Printing of the Windows NT/2000

network printer and verify that you can print from Windows NT/2000 to the

print server by the installed PTPP driver.

Step3.

Share the above server’s printer to the network by performing the standard

Windows printer sharing process.