User Guide

4. Choose NetWare Configuration from the menu.

5. Select Print server in the Printing mode field.

6. Change the Alias name if you want.

7. Set the Primary File Server to be the file server where the print server’ s

queue will be located.

8. Press Escape to exit the Print Server Configuration screen, confirm that

the changes should be saved, and exit PSETUP.

At this point the print server setup is complete, and you can begin setting up

the NetWare print server and print queue objects:

9. Run the NetWare PCONSOLE program.

10. Change the current file server, if necessary, using the Change Current

File Server menu selection.