User Guide

7.2 General - General Information of Print Server
Every time when you run print server’s configuration utility, the system will
initially delay for several seconds because the utility is using system’s
available network protocols to search for all print servers on the network.
Therefore, you must first select the print server you would like to configure
from the Print Server Name’s field under the General tag. The system will, at
the same time, display the selected print server’s model number and firmware
version.
You may select any available printer port in the Printer Port’s field at the
bottom of that page, and then press the “TestPrint” button to test print.
By pressing the “Refresh” button, you may manually search again for print
servers on the network for you to select a newly added print server.
60