User Guide

Re-type new password, confirm the new password.
Change password button: save the new password to the print server.
The print server will verify your password (it will ignore the User Name
item) when you save the configuration.
Make sure to reset the print server (described in section 8.3.11
System Utilities) to let the changes take effect.
8.3.7 Setting IP Address
The IP Cfg page allows you to configure the IP address where the print
server is to be located. The print server will obtain its IP address
automatically by the protocol DHCP, BOOTP, RARP if you configure the IP
address as Auto. Click Save to print server button to save the configuration
to the print server.
The print server will verify your password (it will ignore the User Name
item) when you save the configuration. Make sure to reset the print server
(described in section 8.3.11 System Utilities) to let the changes take
effect.
8.3.8 Configuring DHCP Parameters
The print server can be configured as DHCP server to provide dynamic
IP addresses assignment. The DHCP Cfg page allows you to set:
82