User Guide

9.3 System Setup
9.3.1 Print Server Side
Step1.Execute the Print Server Configuration Utility。
Step2.In the IP Cfg page, configure the IP address.
Step3.In the Mail Print Cfg page， configure Mail polling time and MailBox
parameters.
Mail Polling Time: Default is 1 minute; Intervals for print server to check
Emails in the MailBox.
Mail Server, Mail Account and Password are MailBox's Email server's IP
address, account, and password respectively.
Step4. Press "Write" then "Reset" button.
9.3.2 Client User Side
At first, please confirm that the client computer has installed and setup
the TCP/IP protocol correctly.
Email Printing provides three printing methods, the instructions and
installation are described below:
9.3.2.1 Print directly from applications by using the “Print to Email printing driver”
At first, the client user needs to install and setup the “Print to Email
Printing Driver” from the CD-ROM shipped with the print server package.
You can deliver the “Email Printing Driver” to any one who will print email
from its Windows to your printer. The “Email Printing Driver” is
implemented as a freeware that can be shared with every one. Please note
that the “Email Printing Driver” is designed for Windows only, it can’t be
run on any other operating systems.
The installation procedure is as following,
1. Insert the CD shipped along with the print server into your CD-ROM
drive. Change the directory to “\Email Printing\English\”
2. Execute “setup.exe” program
90