User Guide

10.2 System Setup
10.2.1 Print Server Side
It is needless to do any setting on the print server side. Make sure the print
server has correct IP settings. If you want to share the printers to Internet
users, you have to set a real IP to the print server. You also have to make
sure that any gateway, router or firewall does not block IPP protocol if you
have these gateway devices installed in your network.
10.2.2 Client Side
You only need to perform Window’s standard Add New Printer procedure,
select “Network Printer” shown in the screen below and click “Next >”.
Select “Connect to a printer on the Internet or on a home or
office network” and enter the URL of print server. The URL format
is “http://IP/LPT_PORT:631
”. The IP should be the print server’s
IP. LPT_PORT is the port name of print server that your print is
connected to. For the one port print server, the port name is
“lpt1”. For the three port print server, the port name is one of the
three – lpt1, lpt2 or lpt3. The last number 631 is IPP standard
port number. One example of the URL is
“http://192.168.12.13/lpt1:631”. After entering the URL of print
server, click “Next >” and complete the configurations afterwards
to access the shared printer.
96