User Guide

3) Once you have configured your PCs to obtain an IP address automatically, the router’s

DHCP server will automatically give your LAN clients an IP address. By default the

Broadband Router’s DHCP server is enabled so that you can obtain an IP address

automatically. To see if you have obtained an IP address, see Appendix A.

Note: Make sure that the Broadband router’s DHCP server is the only DHCP server available

on your LAN. If there is another DHCP on your network, you’ll need to switch one of the

DHCP servers off. (To disable the Broadband router’s DHCP server see chapter 2 LAN Port.)

4) Once your PC has obtained an IP address from your router, enter the default IP address

192.168.2.1 (broadband router’s IP address) into your PC’s web browser and press <enter>.

5) The login screen below will appear. Enter the “User Name” and “Password” and then click

<OK> to login.

Note: By default the user name is “admin” and the password is “1234”. For security

reasons it is recommended that you change the password as soon as possible (in

General setup/system/password, see chapter 2).

6) The HOME page screen below will appear. The Home Page is divided into four sections,

Quick Setup Wizard, General Setup, Status Information and Tools.

Quick Setup Wizard (Chapter 1)

If you only want to use the broadband router as an Internet Access device then you ONLY

need to configure the screens in the Quick Setup Wizard section.

General Setup (Chapter 2)

If you want to use more advanced features that the broadband router offers, you’ll need to

configure the Quick Setup Wizard and the General Setup section. Alternatively, you can just

configure the General Setup section, since the General Setup/WAN and the Quick Setup

Wizard contain the same configurations.