User Guide

Parameters Description

Filter client PCs by IP Fill “IP Filtering Table” to filter PC clients by IP.

Add PC You can click Add PC to add an access control rule for

users by IP addresses.

Remove PC If you want to remove some PC from the "IP Filtering

Table", select the PC you want to remove in the table

and then click "Delete Selected". If you want to remove

all PCs from the table, just click "Delete All" button.

Filter client PC by MAC address Check “Enable MAC Filtering” to enable MAC Filtering.

Add PC Fill in “Client PC MAC Address” and “Comment” of the

PC that is allowed to access the Internet, and then click

“Add”. If you find any typo before adding it and want to

retype, just click "Reset" and the fields will be cleared.

Remove PC If you want to remove some PCs from the "MAC Filtering

Table", select the PC you want to remove from the table

and click "Delete Selected". If you want to remove all

PCs from the table, just click "Delete All" button. If you

want to clear the selection and re-select again, just click

“Reset”.

You can now configure other advanced sections or start using the router (with the advanced

settings in place).