User Guide

Parameters Description
Enable DMZ Enable/disable DMZ
Note: If there is a conflict between the Virtual Server and the
DMZ setting, then Virtual Server function will have priority over
the DMZ function.
Public IP Address The IP address of the WAN port or any other Public IP
addresses given to you by your ISP.
Client PC IP Address Input the IP address of a particular host in your LAN that will
receive all the packets originally going to the WAN port/Public IP
address above.
Note: You need to give your LAN PC clients a fixed/static IP
address for DMZ to work properly.
You can now configure other advanced sections or start using the router (with the advanced
settings in place).
Chapter 3
Status
The Status section allows you to monitor the current status of your router. You can use the Status
page to monitor the connection status of the Broadband router's WAN/LAN interfaces, the current
firmware and hardware version numbers, any illegal attempts to access your network, and
information on all DHCP client PCs currently connected to your network.
47