User Guide

10
Check the installation
The control LEDs of the Internet Broadband Router are clearly visible
and the status of the network link can be seen instantly:
1. With the power source on, once the device is connected to the
broadband modem, the Power, CPU, LAN and WAN port link
LEDs of the Internet Broadband Router will light up indicating a
normal status.
2. By using a Straight Through Cable, the WAN’s “X” port must
connect to MDI uplink port, and the WAN’s “II” port must
connect to MDII regular port.
3. If the WAN Port’s Link indicator does not light up then replace
the RJ-45 cable that plugged onto WAN’s “X” port to the “II”
port or from the “II” port to the “X” port at the rear to meet the
specification need of the xDSL or Cable modem.
4. While the LAN is link up to the computer system, the LAN port’s
Link/ACT LED will light up.